PTFE Water Base Coating
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- Category
- Other Paint & Coatings
Dae Young Chemical Co., Ltd.
- Verified Certificate
-
13
| Product name | PTFE Water Base Coating | Certification | - |
|---|---|---|---|
| Category | Other Paint & Coatings | Ingredients | - |
| Keyword | - | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | Stock | - | |
| Supply type | - | HS code | - |
Product Information
Features
We have various PTFE Water Base coatings according to the color and physical property and we are making a constant effort to develop coating materials based on the demand of customer.
Operation method
Remove contaminants -> Drying -> Sanding -> Primer Coating -> Sintering -> Mid Coating(In case of 3 Coating type) -> Top Coating -> Sintering -> Cooling
Application method
- Remove contaminants : Surfaces must be clean and dry otherwise, They cause a rough surface, poor adhesion and pin holes of coating.
- Sanding : The surface should be treated with sandblasting, liquid honing, or an equally effective process. When sandblasting, a 80~100 mesh sand powder should be used for the iron or stainless steel base materials.
- Coating : Coating preparation
- Firmly seal the container, slowly rotate the container at an angle ten times by hand, and then mix the solution with a rotating mixer until it is evenly dispersed. Do not open containers until ready to use. Keep lid on container when not in use.
- Filter the solution with a 100-200 mesh stainless steel screen after rotating enough times.
- Spray nozzle : 0.8-1.3mm, spray pressure : 1.5-2.5kg/m3
Recommended distance between the spray gun and the substrate : 15-25cm
2 Coating system
| Item | Method | Coating Thickness | Curing Condition | Remarks |
| Primer | Spray | 10~15um | 150°C x 5min | |
| Top | 10~15um | 380°C x 5min |
3 Coating system
| Item | Method | Coating Thickness | Curing Condition | Remarks |
| Primer | Spray | 10~15um | 150°C x 5min | |
| Mid | 10~15um | 380°C x 5min | Wet on wet | |
| Top | 5~10um |
Sintering
- When sintering primer, temperature is 110°C ~ 180°C according to the coating.
- In case of same product, As the sintering temperature is higher, quality of coating become better.
- Progressively raise temperature and maintain the maximum temperature for 5 minutes.
- Suddenly heating can cause air bubbles, poor adhesion
Caution
- White spots may appear on the surface of the substrate when the substrate and coating is cold, especially in winter time because of a problem in coating flow. To avoid this phenomenon, please keep it warm(over 10°C) and pre-heat it before working.
- Keep adequate ventilation during application
- Don't mix other types of paint. especially, separate from Powder Coating.
- Ideal storage temperature is 5°C ~ 30°C in warehouse.
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Seiyoung, Noh
- Address
- Namdong Industrial Estate 105BL-6LT, 653-5, Namdong-gu,, Gojan-dong,Incheon,
- Product Category
- Other Paint & Coatings,Pans
- Company introduction
-
Since 1988, Dea Young Chemical Co., Ltd. has been producing special paints, such as PTFE coating, Heat resistant coating, Ceramic coating, Industrial coating and Coating materials to be applied to the electronics products.
The excellence of our coating materials based on the accumulated know-how of coating is developed by Dae Young Chemical Co. and technical know-how has been proved bythe domestic market and the overseas markets. (China, India, East Asian etc.)
We are making an effort to develop new coating material which can be applied to the various industrial fields together with Korea Research (KIER). Meanwhile, we have been learning and using properly the high technology through the corporation with other high-tech international companies.
Coating developed by Dae Young Chemical Co., Ltd. are applied to the inside or the outside of cookware and various fields of industry.
We will do our best to show you how we are developing ourselves and to make you happy with our products.
- Main Markets
-
Argentina
Bangladesh
Canada
China
Greece
India
Israel
Malaysia
South Korea
- Factory Information
-
Dae Young Chemical Co., Ltd
- Main Product
