The Supercombinata SC1, thanks to its standard equipment, is suitable to perform internal line boring and internal and external overlay welding within a working range from Ø 42 mm to Ø 400 mm. It’s suitable for drilling and tapping. By means of extra kits, it is suitable to perform external line boring, facing of orthogonal planes and creation of circlips grooves, threading. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.

DIAMETERS

Boring bar diameter: ø 40 x 2200 mm

In line boring: ø 42 - 400 mm

External Line Boring: Extra kit

Internal welding: ø 42 – 400 mm

External welding: ø 42 – 400 mm

Drilling: Suitable

Tapping: Suitable

Threading: Extra kit

Facing of orthogonal planes: Extra kit

ROTATION MOTOR

AC motor: Single phase

Power at rated speed: 1800 W

Gearbox: 4-speed

Output torque at the bar: Up to 400 Nm with 95 rpm

FEED MOTOR

Gear motor: DC

Power at rated speed: 90 W

Max Speed: 11 rpm

Feed system: Electromechanical

Feed: Manual/Automatic

WELDING TECHNOLOGY

Spiral: Continuous with variable step

Welding machine: Compatible with MIG/MAG welder with EURO connector

LONGITUDINAL STROKE

Unlimited: With 350 mm pitch

ELECTRONIC CONTROL PANEL

Voltage: 220/240 V (50/60 Hz)

Main switch: Available

Emergency switch: Available

Inverter feed: RH/LH

Inverter rotation: CW/CCW

Speed regulator: Rotation/Feed

Electrical absorption: 2000 W

Control panel 110/120 V: Upon request

Digital control panel: Upon request

DIMENSIONS

Length: 680 mm

Width: 240 mm

Height: 380 mm

Weight central unit: 36 Kg

STANDARD EQUIPMENT

Qty 1 - Main unit

Qty 1 - Boring machine stand

Qty 1 - Electronic control panel

Qty 1 - Control panel holder

Qty 1 - Cable control panel/machine

Qty 1 - Power cable 220 V

Qty 1 - Boring bar ø 40x2200 mm

Qty 1 - Boring bar ø 40x1100 mm

Qty 1 - Boring bar extension 520 mm

Qty 1 - Pivot

Qty 1 - Tool holder for boring d. 100-400 mm

Qty 1 - Special tool holder LH ø 12x40 mm

Qty 1 - Tool holder LH ø 12x40 mm

Qty 1 - Tool holder LH ø 12x60 mm

Qty 1 - Tool holder RH ø 12x100 mm

Qty 1 - Box with 10 cutting inserts

Qty 2 - Main bar support

Qty 2 - Additional support

Qty 12 - Bracket for flanges

Qty 1 - Telescopic shaft for welding

Qty 5 - Diffusor extension 35 mm

Qty 1 - Diffusor extension 100 mm

Qty 4 - Short gas nozzle

Qty 4 - Long gas nozzle

Qty 5 - Short contact tip ø 0,8 mm wire

Qty 5 - Long contact tip ø 0,8 mm wire

Qty 1 - O-ring for welding shaft 100x5 mm

Qty 1 - Terminal lance for external welding

Qty 1 - Centring system for through holes

Qty 1 - Centring system for blind holes

Qty 1 - Telescopic gauge up to ø 400 mm

Qty 1 - Dial gauge

Qty 1 - Dial gauge support

Qty 1 - Set of wrenches

Qty 1 - Screws and bolts

EXTRA KITS

BORING REDUCTION

KEP00187 Ø 22 - 44 mm (0,87” - 1,73”)

KEP00188 Ø 32 - 70 mm (1,26” - 2,76”)

FACING

KES00186 Ø 48 - 255 mm (1,89” - 10,04”)

KES00200 Ø 56 - 400 mm (2,20” - 15,75”)

INTERNAL THREADING

KFL00928 Ø 120 - 350 mm (4,72” - 13,78”)

OD MACHINING

KEL00202 Ø 100 - 200 mm - D. 200 mm (3,94” - 7,88”)

KEL00203 Ø 150 - 300 mm - D. 300 mm (5,90” - 11,81”)

BIG DIAMETERS

KED00180 Ø 400 - 600 mm (15,75” - 23,62”)