SPECIFICATION

MODEL

*PMOHY-VD45L-1525M-MCFG

COMPOSITION OF COMPLETE LINE

*3 FLOORS/4 PLATFORMS

MACHINE TYPE

*VERTICAL TYPE DIPPING MACHINE WITH

EACH MOULD BAR ROTATION SYSTEM.

PRODUCTION CAPACITY

*600 ~ 700 pairs/hr

NUMBER OF A BAR QUANTITY

*305 BARS (TOTAL)

*LOADING WEIGHT OF THE MOULD BAR; 9 kgs

NUMBER OF GLOVE MOULD ON 1 BAR

*5 pairs (10 CAVITIES) MOULD

TOTAL NUMBER OF GLOVE MOULD

*3050 CAVITIES (1,525 pairs)

PITCH OF EACH MOULD BAR

*457 mm

MAIN DRIVING MOTOR

*GEARED MOTOR; 1.5 kw ☓ 4 sets=6 kw

*3 PHASE 380 V

MAIN CHAIN FOR LINE MOVEMENT

*186 meters

DRIVING SYSTEM

*CHAIN DRIVE WITH GEAR

MAIN CONTROL SYSTEM

*PLC & ELECTRIC PARTS INCLUDING TOUCH MONITOR

CONTROL SYSTEM MADE BY LG KOREA

MATERIAL SUB-TANK FOR 1st NBR DIPPING STATION WITH IMPELLER AND SPINDLE.

(REFER TO ADDENDUM NO. 1.)

*0.375 kw/4 POLE ☓ 2 sets=0.75 kw(GEARED MOTOR)

*CAPACITY; 400 ltr ☓ 3sets

*STEEL FRAME FOR INSTALLATION

MATERIAL SUB-TANK FOR 2nd NBR DIPPING STATION WITH IMPELLER AND SPINDLE.

(REFER TO ADDENDUM NO. 1.)

*0.375 kw/4 POLE ☓ 2 sets=0.75 kw(GEARED MOTOR)

*CAPACITY; 400 ltr ☓ 3sets

*STEEL FRAME FOR INSTALLATION

BATCH TYPE MATERIAL SUB-TANK FOR FOAM COATING WITH IMPELLER AND SPINDLE.

*0.375 kw/6 POLE ☓ 2 sets=0.75 kw(GEARED MOTOR)

*CAPACITY; 100 ltr ☓ 3sets

*STEEL FRAME FOR INSTALLATION

KIND OF PRETREATMENT MATERIALS AND

TRAY.

(REFER TO ADDENDUM NO. 2.)

1) METHANOL(CH3OH) BASE.

* READY FIRE FIGHTING APPARATUS BY THE BUYER.

2) WATER BASE;

1st GLOVES DIPPING TRAYS FOR NBR COATING

1) STIRING UNIT WITH IMPELLERS & SPINDLE

-SPEED CONTROL MOTOR; 400 w ☓ 2 sets=0.8 kw

2) NBR DIPPING TRAY; 1 set

3) DIPPING TANK UP & DOWN; 3.7kws☓1sets=3.7 kw

2nd GLOVES DIPPING TRAYS FOR NBR COATING

1) STIRING UNIT WITH IMPELLERS & SPINDLE

-SPEED CONTROL MOTOR; 400 w ☓ 2 sets=0.8 kw

2) NBR DIPPING TANK; 1 set

3) DIPPING TRAY UP & DOWN; 3.7kws☓1sets=3.7 kw

1st & 2nd ROCK SALT FLYING UNIT

1) TURBO-BLOWERS FOR SODIUM SULFAE POWDER

-GEARED MOTOR; 3. 75kw ☓ 2 sets=7.5 kw

2) STS LOWER HOUSING FOR PROTECTION POWDER

3) PC UPPER HOUSING FOR PROTECTION POWDER

1st PRE-OVEN SECTION BY ELECTRIC FIN HEATER

SYSTEM.

* QUANTITY OF HEATERS

* POWER CONSUMPTION OF FIN HEATERS

* HOT AIR FEEDING BLOWER

-QUANTITY OF BLOWERS

*HEATING TEMPERATURE; 60 ~ 90 ℃

*BY FIN HEATER SYSTEM ON THE ROOF AREA.

*TOTAL 90 pcs (1 kw/1 pc)

1 set X 90 kws =90 kws (REGULAR POWER)

1 set X 60 kws =60 kws (ACTUAL NECESSITY POWER

*HOT AIR BLOWER; 400 w ☓ 1 set=0.4 kw

1 set X 5.5kw 4p=5.5 kws

POSITIONING UNITS FOR DIPPING STATIONS, LEACHING STATIONS & STRIPPING STATION

1) FOR TURNABOUT OF MOULD BARS FOR DIPPING STATIONS.

(1) AIR CYLINDER; 4 sets

-WATER TANK; 3 sets/ STRIPPING; 1 set

-SENSORS

-PNEUMATIC CYLINER; 6 sets

2) FOR TURNABOUT OF MOULD BARS FOR LEACHING & STRIPPING STATIONS

-PNEUMATIC CYLINDERS; 3 sets

-SENSORS; 3 sets

POSITIONING UNITS WITH STEPPING MOTORS FOR

4 DIPPING STATIONS.

1) STEPPING MOTOR; 4 sets

-ROTATION SECTION; 11 sets

2) DRIVER UNIT; 4 sets

3) REDUCER; 4 sets

4) CABLES.

-GENERAL CABLES

-OPERATION CABLES

5) PNEUMATIC CYLINDER; 4 sets

6) SENSOR; 4 sets

RECOVERING TANK OF PRE-TREATMENT LIQUID

2 sets; 1.7 * 0.45 * 0.2 m

TURBO-FAN BLOWER UNIT FOR SODIUM SULFATE POWDER.

1) Na2SO4 POWDER FLYING UNIT FOR 1 st & 2 nd

ZONE; 2 sets

2) GEARED MOTOR; 3.75 kws ☓ 2 sets=7.5 kw

3) SOLENOID VALVE; 2 sets

-POSITIONING UNIT FOR MOULD BARS & GUIDE PLATE. THESE POSITION UNITS ARE FOR REGULATION MOULD ANGLE AND DIRECTION OF THE MOULD BAR.

*GEARED MOTOR FOR ANGLE ADJUSTMENT.

-400 w X 9 sets=3.6 kw

*GEARED MOTOR FOR DIRECTION ADJUSTMENT.

-400 w X 3 sets=1.2 kw

♣ 5 LEACHING WATER TANKS INSTALLED SPECIAL DESIGNED IMMERSION HEATERS FOR CHEMICAL LEACHING WATER HEATING.

♣ 3 DIVIDED DRYING CHAMBERS ARE ALSO HEATING BY ELECTRIC FIN HEATERS AND THEN HEATED HOT AIR FEED INTO 3 ZONE DRYING CHAMBERS BY EACH FAN. AND HOT AIR SPREAD ON THE GLOVES THROUGH MANY SMALL HOLES WITH THE PLAIN SHAPE.

LEACHING TANKS FOR CHEMICAL EXTRACTION

1) 1st TANK.

-WATER VOLUME; 2.1 TON (FILL WITH 80%)

(1)1st TANK INSTALLED 90 pcs WATER SPRAY.

(3.5 * 750 * 250)

-MOTOR FOR SPRAY; 2.25 kw/3 pole

(2) MOTOR FOR DRAINING WASTE-WATER

- MOTOR; 2.25 kw/3 pole

2) 2nd TANK.

-WATER VOLUME; 2.1 TON (FILL WITH 80%)

3) 3rd TANK.

-WATER VOLUME; 2.1 TON (FILL WITH 80%)

4) 4th TANK.

-WATER VOLUME; 2.1 TON (FIL L WITH 80%)

5) 5th TANK.

-WATER VOLUME; 2.1 TON (FILL WITH 80%)

*SOLENOID VALVE; 6 sets

*TEMP. CONTROL SYSTEM OF 5 LEACHING TANKS.

HOT WATER CIRCULATION MOTOR PUMPS; 5 sets

*5 sets X 0.2 kws=1.0 kw

WATER TRANSFER PUMP MOTORS; 3 sets

*4 sets X 0.4 kws=1.6 kw

* SPECIAL DESIGNED ELECTRIC HEATER SYSTEM.

1) FOR CHEMICAL LEACHING WATER HEATING.

-5 IMMERSION HEATERS INSTALL INTO THE ELECTRIC HEATER HOUSINGS WITH STAINLESS STEELS.

* POWER CONSUMPTION

2) FOR DRYING CHAMBERS & HOT AIR FEEDING UNIT.

(1) HEATED AIR FEEDING & CIRCULATION SYSTEM INCLUDING FIN TYPE HEATERS.

-HOT AIR SPREADING SYSTEM WITH SMALL HOLES ON THE STEEL SHEETS.

-AIR FEEDING DUCTS.

* HOT AIR FEEDING TEMPERATURE

(2) HEATER TYPE

-QUANTITY OF HEATERS

* POWER CONSUMPTION OF FIN HEATERS

(3) HOT AIR FEEDING BLOWER

-QUANTITY OF BLOWERS

(4) CHEMICAL FUME EXTRACTION FAN MOTOR & DUCTS

CONNECTED WITH ROOF FLOOR.

* EACH AUTOMATIC SENSORS INCLUDED.

-WATER LEVEL SENSORS; 4 sets

-TEMPERATURE SENSORS; 4 sets

5 sets X 50 kws =250 kws (REGULAR POWER)

5 sets X 30 kws =150 kws (ACTUAL NECESSITY POWER)

*HEATERS POWER CAN REGULATE OWING TO NBR

COATING SITUATION AS LIKE TEMPERATURE, NBR RESIN VISCOCITY & LINER SITUATION.

* AUTOMATIC TEMPERATURE CONTROL SYSTEM.

HOLE SIZE; 18 Ø

-TEMPERATURE SENSING SENSOR INTO CHAMBERS.

 2 sets

-OVER HEATING TEMPERATURE SENSING SENSORS.

 2 sets(MAX. SETTING 300 ℃)

150 ℃

*SPECIAL DESIGNED FIN TYPE HEATERS

*TOTAL 90 pcs (1 kw/1 pc)

3 sets X 90 kws =270 kws (REGULAR POWER)

3 sets X 60 kws =180 kws (ACTUAL NECESSITY POWER)

*3 sets X 5.5kw 4p=16.5 kws

1 set X 5.5kw 4p=5.5 kws

**THIS FAN MOTOR MAY NOT AVAILABLE IN CASE OF INSTALL OWN SCRUBBER SYSTEM BY THE BUYER.

MACHINE PACKING & LOADING

*40 FEET DRY CONTAINER (6 UNIT)

TOTAL ELECTRIC POWER

         kw

MACHINE DIMENSION (L * W * H)

45m * 2.3m  *4.35m

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

SPARE PARTS;

MOULD BY EACH SIZE

10 pairs * 5 kinds 50 PAIRS

FULL ARM LINK BODY

30 pcs

CHAIN

10 meters

INSULATION SANDWICH PANEL

5 pcs

PNEUMATIC CYLINDER

2 sets

CARTRIDGE HEATER FOR WATER TANK

2 pcs

HEATER FOR DRYING CHAMBER

1 pc

ELECTRIC PART

* MAGNET

* RELAY

FULL SETS

* 3.75 kw; 2 sets

* 10 EA