freezing test packages for refrigerators frozen test iso standard M package 500g

The   freezing test package GB/T805 9.2  9.4 for refrigerator cooling test is in accordance with the requirements of GB/T8059.2 and GB/T8059.4 standard. The test package is placed in the frozen food storage compartment and chill compartment's performance test, or in a refrigerator freezer to test the freezing capability test, to simulate the freezing load capacity of frozen food.

Features:

1. The freezing point of the test package is -1℃ (Its thermal performance is equivalent to lean beef)

2. Packaging material is a thin layer of plastic, or with appropriate materials which can do medium vapor exchange with the environment, immediately seal the packaging material after filling,

3. When measured in chill compartment, must use the -5℃ test package.

4. You cannot use in test of testing freezing capacity and load temperature rise time.

5. M package means the 500g test package, it equipped with a thermocouple in the geometric center to measure the temperature. The thermocouple contacts the package directly.

Note

1. Don’t store it so long time on normal temperature ,note the deformation
2. This freezing load test package is afraid of pressure , fireproofing ,waterproof ,handle with care
3. This freezing test package need toperiodical inspection ,no visible Holes or slits ,When you find the test package exceeds the above-mentioned error, it need to be change

Specification and parameters:

1.  International and Europe standard test package (ISO 15502/GB8059.1-4)

-1 ℃ and -5℃ two type

M package with thermocouple wire or embedded copper pipe,  -1℃ / -5℃

2.  Australia Standard test package AS1731.4-2003