I. Introduction to chemical anchor

Chemical anchor is a capsule for fixing an anchor bolt to a base material such as rock bed or concrete. This capsule Comprises an outer container containing main materials composed with a liquid unsaturated resin and granular stone aggregates, and an inner container, embedded in the main materials, containing a curing agent.

Chemical anchor has characteristics as follows :

* This product is a high load adhesive system for attaching a substrate on a substrate to be attached.
* This product is suitable for vibration resistant and earthquake-proof construction.
* The is product is usable ever underwater
* This product can be adjusted according to order.
 

II. Characteristics

Our chemical anchor product, is a new product using an outer container of special film, combined with plastic film and metal sheet, and an inner container made of glass tube.

K-STICK has several characteristics as follows :

1. K-STICK has excellent workability and transportability.
2. K-STICK has excellent storability because the outer container having metal layer can completely block the light from reaching the unsaturated resin in the outer container.
3 K-STICK can be safely working while anchoring with drill because it doesn't occur the broken glass piece as the conventional glass type.
 

III. Application

A. Buildings - Concrete roof, Emergency staircase, Concrete column reinforcement during the addition, to existing building or renovation, Outer wall and Basement angles, Veranda reinforcement, Fence, Signboard, Lighting, Elevator, Steel foundation, etc.
B. Roads - Soundproof walls, Guardrail, Guidepost, Guideboard, Barrier against falling stone, Overpass, etc.
C. Mechanical Plants - Escalator foundation, Drain pump, Basement tank, Power plant foundation, Rail for hoist, etc.
D. Engineering - Bridge rail, Dock construction.
 

IV. Standard installation condition

* This is a specification we recommend, and a result measured by ourselves.
* Appropriately changeable depending on installation situations.
* Following installation, do not apply load or move during hardening.

V. Installation

VI. Hardening time

VII. Intervals of anchor

VIII. Handling

* Store the product in a cool and dark place.
* Do not expose the product to direct sunlight during installation operation.
* Wear protective equipment during installation(mask, gloves, etc.)
* Keep the product away from fire or heat.
* Do not use the product containing hardened resin.
* When resin contacts on the skin, wash the skin with soapy water.