Product Description
It is used in the transport of fluid and gas and change of direction and diameter,
and when it is branched in many forms from the main pipe, it can be used as a manufacturing pipe necessary for connection joints. 

Product Specification / Models
1. Reducer
large diameter ↔ small diameter pipe connection.

2. Miter-Elbow
 Elbow pipes that are difficult to produce by molding were made through welding   many pieces. They are used in changing the direction of the pipe.

3. Tee
They are manufactured in various forms, such as cross-type, tee-type, and Y-type, and used in dividing from main pipe to branch pipes.

4. Lateral
There are single-types and multi-types, and they are used when branch pipes of various angles are needed from the main pipe.

5. Welded-Pipe
 They are produced by welding pipes that cannot be usually produced from the seamless pipe.

6. Surbmerged Arc Welding Pipe (S.A.W PIPE)
They are produced by Surbmerged Arc Welding Pipe for Fabrication of Structure Steel Pipe.

PRODUCT SCOPE

※ FITTINGS ( Reducer , Miter-Elbow , Tee , Lateral )

- PLATE Thickness:9.5t~120t 
- OD:350mm~4,064mm (14 inch ~160 inch)


※ PIPES ( Length : Below 4m )

- PLATE Thickness : 9.5t~110t 
- OD : 350mm~4,064mm (14 inch ~160 inch)

※ PIPES ( Length : More than 4m ~ below 8m )

- PLATE Thickness : 9.5t~80t 
- OD : 350mm~1,016mm (14 inch ~40 inch)

※ PIPES ( Length : More than 8m ~ below 12.3m )

- PLATE Thickness : 9.5t~50t 
- OD : 350mm~812.8mm (14 inch ~32 inch)

Other Information
Petrochemistry, Essential oil, Gas Plant, Nuclear power, Desalination facilities, offshore structures, shipbuilding, etc.