The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which
60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing
cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor. Market is from
backbone network installation to opto-electronics components production for quality splice.
Specifications:
Applicable fibres : SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others
Fibre Count : Single
Cladding diameter : 80 to 150µm
Coating diameter : 100 to 1000µm
Fibre cleaved length : 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900
Actual average splice loss : 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
Splice time : 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
Return loss : 60dB or greater
Splicing modes : 100 splicer modes are available
Splice loss estimate : Several types of core deformations as well as core axis offset are taken into account for accurate
loss estimate.
Attenuation splice function : Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an
inline fixed attenuator
Storage of splice result : The last 2000 results to be stored in the internal memory.
Magnification : X / Y (300X magnification), or both X and Y simultaneously (160X magnification)
Viewing method : By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor
Tension test : 1.96 to 2.25N
Operating condition : 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively.
Tube heater : Built-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time : 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available
Applicable protection sleeve length : 60mm, 40mm and a series of micro sleeves.
No. of splice/heating with battery : 200 times of splicing and heat shrinking under with BTR-09
Power supply : Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09
Terminals : USB2.0 ( Mini-B) for data and video signal transfer to PC.
Wind protection : Up to 15m/s wind velocity
Dimensions : 146(W) x 159(D) x 150(H) mm. Including wind protector, monitor, and rubber protector. Excluding rubber foot
Weight : 2.5 kg, with ADC-18 AC adaptor, 2.7 kg, with BTR-09 battery
Electrode life : 3000 arc-discharges
Includes:
Fusion Splicer (80S with CLAMP-S70A)
AC adaptor/battery charger (ADC-18)
AC power cord (ACC-XX)
Spare Electrodes (ELCT2-20A)
Cleaver (CT-30A)
Battery Pack (BTR-09)
USB cable (USB-01)
Quick reference guide (M-80S/19S-E)
Warning and cautions (W-70-E)
Instruction Manual (M-70)
Alcohol Pot (AP-01)
Battery charge cord (DCC-18)
Carrying Case (CC-30)
Screw Driver (SD-01)
Price: USD 4,350.00