ATOPY STONETOUCH

│ DESCRIPTION │

1. OPERATEING PRINCIPAL
3 seconds by pressing the power supply indicator lamp is lit. The wave energy is supplied to the generation part
The intensity of the output wavelength is controlled by the control sensor. Control sensor to emit a certain amount to the amount of wavelength.
30 minutes operating time is fixed. Stops automatically.
Repeat with 3 seconds to press the power again.

2. ELECTRICAL PROPERTY

• Rated voltage: 220V
• Rated frequency: 60Hz
• Maximum power consumption: 70W

• The set-up time timer switch automatically turns OFF after 30 minutes.
• Put a fuse, short circuit when power is cut off.

│ APPEARANCE AND STRUCTURE │

1. The power switch
2. LED Power and Light LED
3. Select Switch
4. LED Strong LED
5. Grip
6. Head unit
7. Protections
8. Energy Reflector
9. The outer casing
10. Power Cable

│ WORK AND HOW TO USE │

1. Make sure the power is adequate to use
2. Connect power to the power switch.
3. Adjust the handle to check the status
4. Make sure radiation safety net and the wave energy dissipation
5. Check the height and location of the infrared portion occurs

1. Check the LED lamps and to determine the location of the head.
2. Handle the power switch is ON in the case.(Continuous 3 seconds, press)
   LED power indicator lamp is lit in Dynamics of energy intensity by pressing the switch to select.
3. Warmth on the skin to maintain the proper distance to maintain two minutes.
   And I release it back to maintain one minute. Such behavior is repeated five times in succession.
   Equipment for a total exposure time is 10 minutes Usage of the equipment is too hot or if there is excessive pain, reduce the exposure time.
   Times stretching to 10 minutes total exposure time Make use of more than 4 hours interval.
4. Head towards the right distance between the affected area will be about 5-7cm.
5. To the affected area must maintain the proper temperature. As long as high-temperature burns to the skin should be careful because it is easy to wear.
6. Without passing to the affected area, and uses a certain amount of time exposed.
   Depends on who you feel hot or degree part of the body by burning, wound, or the distance. There may be differences in the secondary, so the user when used by itself should be adjusted accordingly.
7. Device automatically turns OFF after 30 minutes.