APS specify an E-gas pedal,who is simulation traditional gas pedal's working and sending electrical signal to ECU.
APS Compared with the traditional throttle, APS can use wire  to replace the cable , in throttle there put in a micro motor, motor contral the throttle valve. Electronic accelerator pedal can  realize the driver's intentions accurately.

Technical Specifications
1.  Fullfill the standard of FMVSS124,SAEJ1843
2. Ambeint Conditions:
2.1 Operating temperature:-40 deg to 85 deg
2.2 Operating humidity:equal or below 95%
2.3 Storage temperature:-40 deg to 85deg
2.4 Test temperature:23DEG plus or minus 5 DEG
3.  Contacless Sensor is used
4. Electrocircuit：
4.1 Voltage supply:DC12V plus or minus p0.3V
4.2 Operating electrical current:20mA(Max)
4.3 Signal Test load:10KΩ C=4.7nF
4.4 Sensor linearity:under1.5%
4.5 Reverse polarity Voltage Protection:protect
5. Electrocircuit connection
5.1 Matching Connector type;AMP 174262-2
6, Mechanical Requirement:
6.1 Force signal: See Figuer 3
6.2 Starting force:17 N plus or minus 6N,Ending force 33 N plus or minus 6N.
    Resilience more than 7N
6.3 Fatigue Test: Can endure 10million of full working
    stroke cycles (100 times/min)
7、 wire harness
    XS-JX-001
8. Pedestal   DZ-002,DZ-006

Used in agricultural equipment,truck,passenger car,off-highway vehicles,construction equipment and marine applications, applied to the following engines:
yuchai Engine
Weichai Engine
Dalian engine
hangzhou engine
yunnei engine
shanghai engine
bosch company

If you are interested in our product,please contact me.