Technical Parameters of the Machine:

1. raw material scalemm:1000mm~1250mm×0.25~0.7mm×L
2.  rolling depression speed: 17~20M/min
3.  roller number:18~26 couple according to specific panel shape
4.  roller material: adopt high quality No. 45 steel with chromed on surface
5.  main axletree material: adopt high grade No. 45 steel finish machining
6.  power of the main pump:4KW
7.  pressure of hydraulic station: 10~12 Mpa.
8.  electrical control system: Using PLC Control the quantity, length automatically, touch screen
9.  equipment shape size: approximately 10000mm×1600mm×1200mm
10.  Equipment total weight: approximately 7~10 Tons according to specific panel shape.

2. Roof panel forming Machine

Components:
Manual Un-coiler: 1 set
Roll-Forming M/C: 1 set
Hydraulic Cutting: 1 set
PLC Control System: 1 set
Product Rack un-powered: 1 set
3. Technical Specification:
Manual Un-coiler: Un-powered; Load capacity = Max.5Tons;
Roll-Forming machine:
About 18steps to form; Material of Roller: No.45 steel with chromizing on surface
Voltage: 380V/50Hz; Main line speed:8~12 m/min;
Hydraulic Cutting:
Stop to cut---Post cut,
Cutting tool material: Cr12, Heat treatment
PLC Control System:
Using PLC Control the quantity, length automatically, LCD screen,
Product Rack UN powered
4. Hydraulic Un-coiler:
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed,
Automatic stop device; Load capacity = Max.5Tons;
5. Material:
1 Coil Width: 1000mm~1250mm
2 Suitable Coil Thickness: 0.25~0.7mm