Two wet mops rotate 250 times per minute with the width of 46cm by driving power of the motor.
 Cleaning the floor with wet mops cleanly is done in the short term without taking the least pains.
 Clean the floor with wet mops to all the corners that your hands cannot reach!
 -The large floor can be cleaned making the main body widthwise (about 46cm)…
 -The narrow floor can be cleaned making the main body lengthwise(about 23cm)…
 -The low gap can be cleaned because the thickness of the main body is slim…
 Clean the places under beds, desks and tables that you cannot wipe very hard.

It’s difficult to clean the floor with web mops because friction between them and is is serious.
 Do you still clean the floor with wet mops hardly pressing them too much?
 You can very easily remove stubborn stains, old stains and fine dust because the product wipes the floor pressing it with the weight of the main body (about 3kgs).

You can very easily remove stubborn stains, old stains and fine dust in the short term (1500ft² room: takes about ten minutes to clean it) without taking the least pains and the places that wet mops pass are not moist and are completely dry as the motor with strong power presses thick circular superfine fibers wet mops(the entire width: about 460mm: about two times than the one of general wet mop cleaners) which are attached to two rotary boards with the weight of the main body (about 3kgs) and wipe the floor rotating them about 250 times per minute.

  1. “Economic” : There are no any expendable parts except wet mops and electric consumption is very small as  power consumption is about 80w.
  2. Very simple preparations to use the cleaner!
  3. The places that the cleaner passes are ‘completely dry’.
  4. It’s killing two birds with one stone because it can be used as ‘the polish’.
  5. “Superfine fibers” (Microfiber) wet mops!
  6. It’s sanitary : It’s clean because virus and mites cannot be easily propagated as it’s the chemical fiber.
  7. It’s “safe” : There is scarcely dust due to driving of the motor because the motor is sealed and its operation is  automatically stops as the device to prevent overheating detects overheating when it is overheated. 
And, The wet mops’ operation automatically stops as the device to detect overload detects foreign substance  when it is wounded around both of the rotary wet mops.
  8. You can relax!

Detail Description

Product Name : "HONORS" Dual Rotational Wet Mop Cleaner

Function : Cleaning the floor with wet mops, polish

The Model Number : 889H

Weight : About 3.4kg (Except the power cord)

Use : For House

The size of the main body : About 425*205*105

Input power : AC 110V or 220V

Power consumption : About 80W

The length of the power cord : About 8M (including the interior line)

The number of rotation of mops (No load) : About 250rpm

The Quality of material of mops : Microfibers