HMS-5500

│Model No : HMS-5500 /AMP55T (low temp)│

• Variable temp : 80K ~ 350K (model#: AMP55T )
• HMS-5500 can be compatibly used with both low temp magnet kit (model# :AMP55T) and high temp magnet kit (model#: AHT55T5, upto 500dC ).
  Below image is to show model# HMS-5500 + AMP55T, for low temp.

│Model No: HMS-5500 / AHT55T5 (high temp)│

• Variable temp : RT ~ 773K (model# : AHT55T5 )
• HMS-5500 can be compatibly used with both low temp magnet kit (model# :AMP55T) and high temp magnet kit (model#: AHT55T5, upto 500dC )
• Below image is to show model# HMS-5500 + AHT55T5, for low temp

│Consists of│

1. Main body system

• Constant current source + Van der Pauw method terminal conversion system

2. 0.55Tesla magnet kit (Model #: AMP55T)

• 0.55Tesla permanent magnet (+/-0.03Tesla)
• conductive sample mounting board
• Heater embedded into sample mounting board
• LN2 reservoir tank (round type upper LN2 tank, square type lower LN2 tank)
• Temperature sensor on the surface of sample board.

Sample mounting kit construction Model#: SH80350K	AMP55T magnet kit top view
1. Round LN2 reservoir. 2. Magnet lit 3. Heater 4. Sample mounting board 5. Temperature sensor. 6. Sample	1. Round LN2 reservoir 2. Metal plate on the bottom of round LN2 reservoir for conveying cooling energy to sample board. 3. Automatic magnet movement by motorizing system. 4. Magnet lid

3. Model# RTSK-5000

• Model# RTSK-5000 is very good to measure only at RT and LN2(77K) temp conveniently.
• Model# RTSK-5000 kit consists of derlin magnet lid , SPCB-21 sample mounting board, and cable.
• Optional item.
  
• You don’t’ need to use model# SH80350K sample holding kit when you just like to measure at RT and 77K(LN2) temperature.
• This is an optional item and can be used with model# AMP55T, not with available with AHT55T3.

4. 0.55Tesla magnet kit ( Model#, temp: RT ~ 300dC)

• Magnet moves automatically.
• 0.55Tesla (+/-0.03T) permanent magnet.
• Temperature increased automatically, ranging from RT ~ 300°C(773K).
• You can flow purge gas into small chamber and measure hall effect at the same time. Gas control valve can be installed as an option.
• Chamber must be installed before you start to measure sample. Replace ambient air into N2 gas inside of chamber to avoid oxidization in high temperature test.
  Chamber also helps to maintain high temperature inside of chamber by avoiding cool airflow ,made by automatically moving magnet.

5. S/W Program

│Product Specifications│

1. General Factors

2. Sample Structure 3D of Measurement Sample

3. S/W Operation Environment Windows 98 / ME / 2000 / NT / XP / VISTA/ Win7

4. Data Index

• Bulk, Sheet Carrier Concentration
• N/P type determination.
• Resistivity
• Carrier mobility, Hall Coefficient
• Magneto resistance
• Alpha (Vertical/Horizontal ratio of resistance)

5. Dimension (Size)

• HMS-5500 main body : 440 x 420×140 mm (W×H×D) / Weight : 8.5 kg
• AMP55T magnet kit : 700×220×280 mm (W×H×D) / Weight : 15.5 kg
• AHT55T5 magnet kit: 670 x 210 x 250 mm(WxHxD) / Weight : 15 kg.

6. Materials for Measurement

Si, SiGe, SiC, GaAs, InGaAs, InP, GaN, TCO(including ITO), AlZnO, FeCdTe, ZnO, etc., all of semiconductors can be measured (N/P-type)

│Certification of the performance│

• CE Mark : Model# HMS2000 – July, 2004 year.
• CE Mark: Model# HMS3000 – March, 2005 year
• CE Mark: Model# HMS5000 – 2009 year.
• CE Mark: Model# HMS5300 – 2009 year.
• CE Mark : Model# HMS5500 – 2009 year.
• Patented : Hall Effect measurement system for HMS5000 – Jan, 2010year.
• Patented: SPCB type sample holder – March, 2010year.