▶ AUTOMATIC OIL PURGE

Oil captured during refrigerant recycling automatically drains into an oil cylinder. The sight glass displays
the exact amount of captured oil-no more manual draining after every a/c service. You'll save valuable
time

▶ CLOSED LOOP FLUSH UNIT

The Flushing procedure is carried out in a Closed Loop Configuration . Close Loop Flushing with liquid
refrigerant is a quick, effective method of flushing , which does not introduce any foreign chemicals to the
system that may lead to further problems.  The flushing process can be improved by the introduction of
an oil-based agent.
Flushing mode helps to remove all oil and debris from the A/C. Flushing mode helps to remove oil and
debris from the A/C. Pressurize and recycle repeatedly with it's compressor and flush oil all the system.
Designed to work with recovered refrigerant. Make out the clog of the condenser, evaporator, compressor
and expansion valve. Flush unit is simple to use and will hold up through many flush procedures.

No need other flushing agent

▶ SERVICE IS QUICK AND SIMPLE

Isolation compressor is installed and its pre-program processing function implements all the flushing
process automatically to cut down service time

· Compatible with R134a
· Reduces comebacks
· Increases customer satisfaction
· Non-flammable
· Easy to use
· Leaves no residue.
· Eliminate moisture and air
· Refresh refrigerant
· Increase mileage
· Uses recovery gas for flushing
· Safe for compressor and o-rings
· Temperature improved 35 °F~43 °F (2 °C~5 °C)

▶ CONTROL PANEL

Separate switches for each function keep the equipment operator in control. the Magicfold gauge
indicates the pressure/temperature and general trouble of the system and routine service can be
accomplished very quickly (Refer to our Magicfold gauge detailed instruction)


ALPHAplus SOLUTION AIRMAX and Oil Charge for air-conditioning systems
that helps to create an improved, cooler environment. The oil bonds to the metal
inside the system and removes the build up of oil and forms a conductive layer for
better heat transfer of the refrigerant.
Compressor manufacturers agree: Debris and excess or the wrong type of
refrigerant oil can damage compressors. When you flush out debris and oil, you
guarantee the system is clean of contaminants; you are in control of the type and
amount of oil going back into the vehicle. Whether you're replacing A/C
components or retrofitting from R12 to R134a, flushing by MF260 is a must.

▶ FEATURES

· Recover, Recycle, Evacuate, Recharge and Flush
· Onboard Magicfold gauge for gas Recharging and showing general trouble of the system.
· Use with R-134a
· Recover Rate : 0.3kg/min.   Recycle Rate : 0.4kg/min
· Power : 240 V. 60 cycle(110~120 V. 50 or 60 cycle available)
· 50lbs  rechargeable recovery tank and electronic scale-resolution 1/200lb(0.01kg)
· ALPHAplus Original Quick Disconnecting Couplers
· 2.5m charging hoses
· Oil less Vacuum pump needs no oil maintenance.
· Air wheels
· Canister top valve and electronic scale.
· Operation temperature: 680~1130F(200~450C)
· Dimensions: H41" x W20" x D28" Inches (H105 x W50 x D70 cm)
· Weights: 176lb(80kg)

▶ Result of flushing by MF260