Yessform System
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- South Korea
- Brand name
- Yessform
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
YESSFORM
- Verified Certificate
-
11
Product name | Yessform System | Certification | - |
---|---|---|---|
Category |
Home & Kitchen
Other Machinery & Industry Equipment Molds Heat Insulation Materials |
Ingredients | - |
Keyword | insulator , passive house , concrete forms , insulated concrete forms | Unit Size | - |
Brand name | Yessform | Unit Weigh | - |
origin | South Korea | Stock | - |
Supply type | - | HS code | - |
Product Information
Yessform
│Introduction│
Cool summer. Warm in winter. Quiet indoor environment. Reduction of heating and cooling cost!
Interlayer noise solution "yessfoam system"
"yessform” guarantees Insulation of building genuine quality
Use of Product |
Die combined use of insulating finishing material |
Size |
Small : 660 x1404, Large : 660 x 1654 |
Material |
Foamy polystyrene (Compressed styrofoam) |
Invented By |
Kang Chang-gyu |
Patent Name |
Die framework and its use to install mold dies |
│Comparison│
The existing dies |
Heavy steel products of euros. In-cornor Using out-corner, High cost of labor and transportation Excessive construction period Causing genuine temporary material’s cut and damaged After the progress of work, attach separate insulation |
Yessform Dies |
With Lightweight-compressed steyrofoam material Being able to personnel and equipment fee, Shorten a loss of materials costs Separate insulation attached is not required Die combined use of insulating finishing material |
│System│
Classification |
Item |
Condensation |
Corner foam |
After installing the outer corner upright Do the connective installation of yess foam, and Before the installation of yess foam, pre-install corner foam on the based corner, then connect yess foam to combine them. * Material: Compressed foam | |
Yess foam |
The joint where H-BAR is inserted is concave, and Fixing with yess pin after H-BAR’s insertion, This structure with the combination will have its stability and precision bonding. * Material: Compressed foam | |
H - BAR |
Yess foam connected to each other, and assembled, then, yess pin Fixes them. * Material: Plastic | |
Yess Tie |
Its role is to grab the both form. Fixing H-BAR to keep the inner-space between Yess-Forms, and to support their horizontality Hooks can be combined. * Material: flat tie | |
Corner Bar |
After connecting and installing internal right angle of Yess-Form, fix them with Yess-Pin * Material: Plastic | |
Yess Ring |
Insert to Yess-Tie. Installing to be hooked at of Tie, the internal space of the Yess-Form is kept * Material: Plastic | |
Yess Pin |
H. Bar, Corner Bar connect to the Yess-Form each other to fix them, * Material: Plastic |
│Construal Height of Floor│
Yess Form’s height is completed with its 2 sheets installed
Height of Floor |
Classification |
Inner Wall |
Outer Wall |
3,058 mm |
2nd level |
1,404 |
1,654 |
1st level |
1,404 |
1,404 | |
Over all |
2,808 |
3,058 | |
3,308 mm |
2nd level |
1,404 |
1,654 |
1st level |
1,654 |
1,654 | |
Over all |
3,058 |
3,308 |
│Specifications & Patents│
Type |
Dimensions |
Material |
Patent No. |
Patent type |
YESS Form |
Small: 50 x 660 x 1404 Large: 50 x 660 x 1654 |
Compressed Styrofoam |
No. 10-1250860 2012.3.0637463.0 |
■ Registered as a patent in Korea ■ Registered as a design patent in China |
Corner Form |
Small: 660 x 1404 Large: 660 x 1654 |
Compressed Styrofoam |
2013-0047485 |
■ Applied for the design patent in Korea |
H-Bar |
For crossing: 50 x 100 For left and right connection: 100 x 100 |
Plastic |
201230655461 2012.3.0655461.4 |
■ Applied for the patent in Korea ■ Registered as a design patent in China |
Corner Bar |
For crossing : 50 x 100 For left and right connection: 100 x 100 |
Plastic |
201230655245 |
■ Applied for the patent in Korea ■ Registered as a design patent in China |
YESS Tie |
180 mm (2.3 x 18mm) |
Metal |
20230655430 2012.3.0637401.X |
■ Applied for the patent in Korea ■ Registered as a design patent in China |
YESS Ring |
30 x 20 |
Plastic |
2013-0047493 |
■ Applied for the patent in Korea |
│YESS Form construction on the upper slab│
Issues of the conventional construction method
- Fixes plywood (12mm) on wood with nails for concrete casting on floor plate.
Puts insulation and dustproof Styrofoam on plywood, cast concrete, and then removes wood and plywood. - Inconsistency with the total array size of the floor plate causes the cut-off of a scrap of plywood - excess loss of material and labor costs
- Transportation, installation, and removal of plywood – excessive cost of transportation
Advantages of YESS Form System
- In the state of zero energy loss, the system casts concrete. Therefore, it improves around 15% intensity of cast concrete in winter (cold season) compared to the conventional method.
- The system does not require plywood, instead, assemblies YESS form on wood along with H-BAR, Corner Bar, Plastic connection pins. After that, it casts concrete. Therefore, it does not require installation and removal of plywood.
: Greatly shortening of construction period, and reduction in labor and material costs.
Use of YESS Form and wood (not use plywood)
│Fair Comparision│
│Constructive Competitiveness│
- Features - cost savings
Wall insulation and die construction costs (Horizontal. Vertical 2,400 MM)
Excellent performance! Reference to imagine more satisfactory !
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Chang Gyu Kang
- Address
- 710 Sangmun-ri, Munsan-eup, Jinju-si, Gyeongsangnam-do, Korea
- Product Category
- Home & Kitchen,Molds
- Year Established
- 2013
- No. of Total Employees
- 1-50
- Company introduction
-
Dear customers,
Yessform has developed, manufactured and distributed Yessform which is light styrofoam insulated finishing material for mold in construction. We locate in Jinjoo, Kyungnam, Korea.
Through our technology and construction career and knowhow our technology and construction method have been recognized not only in Korea but in the world and we acquired patent right for Yessform.
Yessform can be used as mold as well as insulated finishing material, so no construction, installation and disassembly of mold are required.
As it is used by assembly type of work, it is light and convenient, and high insulation effect is available by its optimized sealing.
As it is compressed styrofoam, accident risk is quite low.
Providing comfortable room environment by eliminating noise between floors and from outside in complex building!
- Main Product