Defi Xpress is a defibrillator device, which can meet your clinical needs from Basic Life Support (BLS) to Advanced Cardiac Life Support(ACLS).

Display

•  Screen Type: High-resolution display
•  Screen Size: 7 inches (17.7 cm) diagonally
•  Sweep Speed: 25mm/sec
•  Information: Heart Rate, Lead/Pads, Alarm On/Off, SpO2, AED
•  Functions and Prompts Alarm Selection and Limits, Delivered Energy.

 Defibrillator

•  Waveform: Biphasic
•  Charge Time: Less than 7 seconds with a new fully charged battery.
•  Energy Display: Monitor display indicates both selected and delivered energy.
•  Charge Prompt Type: Voice and visual prompts.
•  Electrode Impedance Measurement Range: 0-250 ohms.

 ECG Monitoring

•  Patient Connection: 3-lead ECG cable, or 5-lead ECG cable, paddles.
•  Lead Selection: Displayed on monitor, paddles, I, II, III, AVR, AVL, AVF, V.
•  ECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm/mV display on monitor.
•  Heart Rate: 20-300BPM.
•  Heart Rate Alarm: On/Off displayed on monitor, user-selectable.
•  Smart Alarms: Beeper/voice prompts indicate shock able rhythm.

Battery

• Type: Rechargeable, Ni-MH battery, 12V.
• Operating Time: For a new, fully charged battery: 60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating    time with different functions.

SpO2 Module (Options):

•  Measurement Range: 30~100%, ±2% between 80%~90%, others ±5%
•  Alarm Range: User set high limit and low limit.
•  Alarm Accuracy: ±10% within setting values.
•  Alarm time Accuracy: less than 12 sec.

1-
2-

Recorder

•  Paper: 50mm thermal.
•  Speed: 12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay.
•  Printing Method: High-resolution, thermal print head.
•  Print-out Modes: Manual or automatic, user-configurable.
•  On/Off Control: Front panel and paddle.
•  Automatic Function: 9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge.

 AED Mode

•  AED Function: Auto analyze and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts.
•  Shockable Rhythms: Ventricular fibrillation with amplitude >=200uV, ventricular tachycardia with rates >=140bpm, and QRS complex wave duration >=140ms.
•  Charge Control:  Control on device front panel, press key on paddle.
•  Prompts:  Voice and visual prompts.

 Manual Mode

•  Energy Selection: Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules.
•  Synchronized Mode: Synchronizes defibrillator pulse to patient’s
•  R-wave. ”SYNC” message displayed on monitor.