Home Machinery & Parts Machinery Parts Pipe Fittings

Stainless Steel Fittings

Negotiable Min Order Quantity Unit

Join Top Co., Ltd.

Verified Certificate

TRADE TOWER

DUNS

Minisite Follow Company

Competitive Advantage of EZ-Joint

Durability on High water pressure
EZ-Joint boasts average water pressure of 50kgf/cm² depending
on the size. Please refer to the Table on the Right.
Revolutionary design to Maximize tensile power
Jaws made of SUS420J2 strongly bite the surface of the tube.
Easier and Faster installation
EZ-Joint can install/uninstall in seconds with no tools.No soldering or welding requires.

Reusable and Rotatable
EZ-Joint shows no water leakage or decreased pressure after 20 times of connecting and disconnecting test.
It can be reused and be rotated as well without compromising performance.

J-Type Parts Informaton

PARTS		FUNCTIONS	MATERIALS
1	Jaw Holder	1) A cartridge where the Jaws are equipped. 2) Tube-Release clip, when it is pushed, the Jaws move along to release the inserted tube which was grabbed tightly by Jaws before. 3) Spring is fit on the end of Jaw Holder.	Polyamide 66
2	Snap Ring	Prevents the disassembly of all the parts inside, installed into the groove inside of the body end.	Stainless steel 304
3	Jaw	Bites the surface of tube to grab and to generate tensile force. The more water pressure pushes the spring backward, the more tensile force JAW generates.	Stainless steel 420J2
4	Spring	Helps Jaws to bite the tube tightly, and to slide up and down smoothly in pushing the Jaw Holder back and forth to install and uninstall.	Stainless steel 304
5	Spring Guide	1) Guides Spring to fit and align properly. 2) Protects O-Ring 1 from contacting with Spring directly.	Polyamide 66
6	Backup Ring	1) Prevents O-Ring1 from contacting with O-Ring 2 to avoid rubber melting. 2) Helps O-Rings compresses between the wall of Body and the tube.	Polyamide 66
7	O-Ring 1	Sealing the surface of tube to prevent water leakage.	EPDM
8	O-Ring 2	Supporting O-Ring1, sealing the surface of tube to prevent water leakage.	EPDM
9	Body	Casting equipped with all the parts.	Stainless steel 304

PARTS		FUNCTIONS	MATERIALS
1	Jaw Holder	1) A cartridge where the Jaws are equipped. 2) Tube-Release clip, when it is pushed, the Jaws move along to release the inserted tube which was grabbed tightly by Jaws before. 3) Spring is fit on the end of Jaw Holder.	Polyamide 66
2	Jaw	Bites the surface of tube to grab and to generate tensile force. The more water pressure pushes the spring backward, the more tensile force JAW generates.	Stainless steel 420J2
3	Wave Spring	Helps Jaws to bite the tube tightly, and to slide up and down smoothly in pushing the Jaw Holder back and forth to install and uninstall.	Stainless steel 301
4	Spring Guide	1) Guides Spring to fit and align properly. 2) Protects O-Ring from contacting with Spring directly.	Polyamide 66
5	O-Ring	Sealing the surface of tube to prevent water leakage.	EPDM
6	Body	Casting equipped with all the parts.	Stainless steel 304

Join Top Co., Ltd.

Minisite Heart

TRADE TOWER

DUNS

Company introduction: Since the establishment of the year 2000, our mission is to provide fittings with a technology of the easiest and fastest way to connect stainless steel tubes.With EZ-Joint, users can implement durable and credible project.

JoinTop has successfully developed push-fit type fitting technologies. EZ-Joint presents revolutionary solutions to connect stainless steel tube, patented in the United States of America, China, Japan, South Korea and Taiwan.
You can connect tubes easily by using EZ-Joint fittings, with no welding or no pressing, With EZ-Joint, we promise to bring you the quality fittings and save your project time and cost. Also, we keep our mission to develop quality joints to help your fitting projects.