Fluonics Co., Ltd.
- Verified Certificate
-
16
Product name | PFA Lined Diaphragm Valve | Certification | - |
---|---|---|---|
Category | Valves | Ingredients | - |
Keyword | - | Unit Size | - |
Brand name | - | Unit Weigh | - |
origin | Stock | - | |
Supply type | - | HS code | - |
Product Information
Lining Materials
PFA
PFA exhibits thermal characteristics like to PTFE, being able to withstand super low to high temperatures (260°C Maximum temp. for continuous use). It is also transparent and mechanically strong under high temperature. It is easily workable besides applicable with extrusion molding to the same degree as general thermoset plastics. It is used where purity is important, such a semiconductor wafer baskets, piping couplings and non-corrosive linings. PFA has better mechanical strength at high temperatures than FEP, and excellent moldability for easy processing by extrusion, compression, blow, transfer and injection molding methods. Due to the high bonding strength of the carbon, fluorine and oxygen atoms, PFA demonstrates nearly the same outstanding capabilities as PTFE in temperatures ranging from -200°C to +260°C.
FEP
FEP is a copolymer for tetrafluoroethylene and hexafluoropropylene. FRP consists of carbon atoms and fluorine atoms, as does PTFE, and has a molecular structure in which one of the fluorine atoms bonded to the carbon atoms. FEP has a lower melt viscosity than PTFE and can be processed like other molten thermoplastic resins by extrusion, transfer, injection, and compression molding. Because the bonding energy between its carbon and fluorine atoms is so high, and because the carbon chain is completely surrounded by fluorine atoms, FEP fluorocarbon polymer retains excellent thermal, electrical, and chemical stability. Therefore, it shows high performance in electrical, chemical, and medical applications in temperatures ranging from extremely low to extremely high (-200°C ~ +200°C / -328°F ~ +392°F).
PTFE
The fluorine atoms completely cover the carbon chain backbone and protect the carbon-carbon bond from attack. The fluorine atoms are also responsible for the low surface energy and exceptional frictional characteristics of PTFE. Because of very high melt viscosity, PTFE does not flow above its melting point. It requires special polymer processing like paste extrusion, compression molding and sintering. Among all the fluoroplastics products, PTFE offers the highest heat resistances at 260°C (maximum temp. for continuous use). It is not corroded by most chemicals and has good electrical insulation and dielectric characteristics. Moreover, it has a unique non-stick property and the lowest coefficient of friction amongst solids. It is the most widely used fluoroplastics, now found in O-rings, gaskets, bearing, tube, wiring, hot plates and irons because of its non-stick property, as well as chemical tank linings.
Property
|
PFA
|
FEP
|
PTFE
|
||||||
Testing
Method |
Value
|
Unit
|
Testing
Method |
Value
|
Unit
|
Testing
Method |
Value
|
Unit
|
|
Specific
Gravity |
ASTM
D-330 |
2.14~2.16
|
-
|
ASTM
D-2116 |
2.12~2.17
|
-
|
ASTM
D-3307 |
2.14~2.20
|
-
|
Melt Flow
Rate |
ASTM
D-330 |
7~8
|
g/10 min
|
ASTM
D-2116 |
6
|
g/10min
|
-
|
-
|
-
|
Melting
Point |
ASTM
D-330 |
304
|
°C
|
ASTM
D-2116 |
260
|
°C
|
ASTM
D-3307 |
327
|
°C
|
Tensile
Strength |
ASTM
D-330 |
33.3
(4835) |
MPa
(psi) |
ASTM
D-2116 |
31
|
MPa
(psi) |
ASTM
D-3307 |
13.7~34.3
(1990~4980) |
MPa
(psi) |
Elongation
|
ASTM
D-330 |
420
|
%
|
ASTM
D-2116 |
370
|
%
|
ASTM
D-3307 |
200~400
|
%
|
Chemical
resistance |
-
|
Excellent
|
ASTM
D-2116 |
Excellent
|
-
|
Excellent
|
_
|
Features
Materials
Item
no. |
Description
|
Material
|
||
Stainless Steel
|
Carbon Steel
|
Ductile Iron
|
||
1
|
Body
|
ASTM A351 CF8/CF8M, PFA, FEP Lined
|
ASTM A216 WCB, PFA, FEP Lined
|
ASTM A395 PFA, FEP Lined
|
2
|
Diaphrgm
|
N-PTFE
|
N-PTFE
|
N-PTFE
|
3
|
Cushion Rubber
|
EPDM
|
EPDM
|
EPDM
|
4
|
Compressor
|
ASTM A351 CF8/CF8M
|
ASTM A351 CF8/CF8M
|
ASTM A351 CF8/CF8M
|
5
|
Spindle
|
ASTM A479 - 304
|
ASTM A479 - 304
|
ASTM A479 - 304
|
6
|
Name Plate
|
ASTM A240 - 304
|
ASTM A240 - 304
|
ASTM A240 - 304
|
7
|
Bonnet
|
ASTM A351 CF8/CF8M
|
ASTM A216 WCB
|
ASTM A351 CF8/CF8M
|
8
|
Hand Wheel
|
ASTM A351 CF8-CF8M
|
ASTM A216 WCB
|
ASTM A351 CF8/CF8M
|
9
|
Stud Bolt
|
SUS304
|
SUS304
|
SUS304
|
10
|
Wrench Bolt
|
SUS304
|
SUS304
|
SUS304
|
11
|
Spindle Plate
|
ACETAL
|
ACETAL
|
ACETAL
|
Diaphragm Valve
Ordering Information
Automated Diaphragm Valve
Depending on diameter and materials of construction, up to 10 bar working pressure and 150°C working temperature, Chemical resistance of actuator. -Actuator : Membrane actuator, plastic |
Dimensions (Control Function1)
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- LEE, SANG-SUN
- Address
- 561-11, Gwanggyeok-ri, Hojeo-myeon,, Wonju-si,Gangwon-do,
- Product Category
- Valves,Water Treatment
- No. of Total Employees
- 51-100
- Company introduction
-
We will manufacture the products which has competitiveness compare with competitors in order to enlarge to leading company in the market situation advanced scientific and technical. We will grow to creative telegram company which knows new be the challenge.
We develop a company to meet to customer needs by introduce a high technology from foreign country or company and increase economies of market share in domestic with highly motivated business plan including to Lining article, Machining, Automotive, Extrusion, Injection of fluoro-polymer and Electro-polishing products, others Engineering plastics, etc.
- Main Product
Related Products
Cast iron flanged ends OS Y gate valve BS5150 PN16 BS5163
Lug Type Double Eccentric Butterfly Valve
KIS (Pneumatic Solenoid Valve)
FR Coating
L-CO₂ Tank Lorry