Mold Temperature Automatic Controller, PRH C
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- Category
- Plastic Product Making Machinery
Masang Machinery Co., Ltd.
- Country / Year Established
-
South Korea
/
- Business type
- Others
- Verified Certificate
-
16
| Product name | Mold Temperature Automatic Controller, PRH C | Certification | - |
|---|---|---|---|
| Category | Plastic Product Making Machinery | Ingredients | - |
| Keyword | - | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | Stock | - | |
| Supply type | - | HS code | - |
Product Information
This new technology produces high glossy, bright, and well printed product through rapid mold heating higher than heat transformation temperature of high molecule resin and rapid cooling down after completion of filling resin, making good imprinting and eliminating weld line, also our PRH&C remarkably shortens the cycle time by performing rapid heat exchange speed.
PRH&C System
PRH&C Practical Application
|
"Pressurized Water Rapid Heat & Cool Method" which is to raise water temperature up to 190°C.
|
 |
NO Weld
- Regardless of the #. of gate and the positions.
- Uniform pressure on the molding surface.
A simulation doesn't need
NO Painting
- Painting process doesn't need
- Cost savings and delivery shortened
- Recycling is possible
NO Scratch
- Strengthened against scratch
- High glossy surface
- Uniform surface molding
YES Best Quality
- Improve on the resin flow during injection molding.
- Stress reduced and strength improved.
- Good on thin products with increasing fluidity.
Comparison of PRH&C & Japanese Brand
|
Item
|
PRH&C(Masang)
|
Japanese Brand
|
|
Method
|
Pressurized Rapid Hot Water
|
Steam
|
|
Energy Control
|
Recycle for hot water
|
Steam Discard
|
|
Installation Cost
|
With USD 70,000
(Excluding Vacuum Equipment) |
Around USD 300,000
(Excluding Vacuum Equipment) |
|
Using Energy
|
Electricity(Heater Use)
|
Boiler(Oil Use)
|
|
Machinery Cost
|
USD 1,200/Min (962kw/day)
|
USD 25,000/Mon(Gasoline 1000~1100L/day)
|
|
Cycle Time
|
82sec
(Heat 41sec Cooling:10sec) |
85sec |
|
Cooling Speed
|
Turbulent Flow System
|
General Cooling Method
|
|
Temp Variation
|
3°C
|
15°C
(Temp Variation between entry and exit gate) |
|
Heat
Source |
Energy
Consumption (USD) |
Cooling
Equipment/ Operational Expense |
Temp.
Variation |
Heat
Time |
INJ
Time |
Cool
Time |
Cycle
|
|
|
Steam
System |
Boiler
(Steam) |
GAS : $12,960/ Mon Disel : $22,000/Mon
|
Capacity : 50HP 33,699KW/Mon = $1,590
|
8~15°C
|
160°C
33sec |
18sec
|
23sec
|
74sec
|
|
Disel/GAS
|
||||||||
|
PRH&C
|
Heater
(Warm Water) |
$600 ~ 1,200/Mon
|
Capacity : 15HP 6,480KW/Mon = $305
|
2~3°C
|
180°C
28sec |
18sec
|
13sec
|
59sec
|
|
Electricity
|
PRH&C Application Effect(Scanning Electron Microscope Picture Analysis)
PRH&C Application Effect(Scanning Electron Microscope Picture Analysis)
When applying PRH&C Technology, haggard(rough) side is much more dense, while showing glossy surface with high reflexibility.
Simulation
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- LIM, CHAE-BOK
- Address
- 363-6 Dangjeong-dong, Gunpo-si, Gyeonggi-do, 435-832 Korea
- Product Category
- Plastic Product Making Machinery
- No. of Total Employees
- 1-50
- Company introduction
-
Masang Machinery Co., Ltd. is one of the Korea's leading manufacturers and exporters of automatic mold temperature controllers. Since establishment in 1985, the company has played a leading role in the plastics industry and has built a favorable reputation with both domestic and overseas customers.
The company's patented systems have obtained the CE quality mark, with its combined automatic mold temperature controller, featuring a built-in chiller, a popular success. Its unique system controls the temperature from 5��to 160��using sensors installed inside both movable and fixed molds. Benefits include economizing on electric power and improving productivity. State-of-the-art technology and experience guarantee the highest quality products and the best performance.
Masang Machinery is a privately owned company with registered capital of US$400,000 and total annual sales of US$1 million, 10% of which comes from exports. The company has two overseas branch offices in China and plans to establish further branches around the world in the near future.
- Main Product
Related Products
Plastic Sheet
PVC CASTING TYPE MACHINERY PVC PRODUCTION LINE
Medical Silicone Catheter Tube Extruder Machine Line
PS Foam Sheet Extruder JINSUNG
PVC decorative film
