Special Feature of Automated Heating

• Fuel Saving-Rooms not in use can be controlled easily.
• Convenience-Room temperatures can be controlled as desired.
• Compatibility-Can be installed in any kind of boiler.
• Rupture Prevention-When room temperature is less than 5 dg. C, run the boiler and prevent rupture.
• Where to use-Apartment units, housing, motels, officetel, buildings and boarding houses.
• Heat Source-District heating, central heating, gas boiler, solar heat and oil fired boiler.

	Static Signal : Red(+), Black(-) →CLOSE Reverse Signal : Red(-), Black(+) →OPEN Model : AT12-2T, A212-2T, A312-2T(DC 12V). AT24-2T, A224-2T, A324-2T(DC 24V)
	Switch : ON →OPEN, OFF →CLOSE Model : AT12-3T, A212-3T, A312-3T(DC 12V), AT24-3T, A224-3T, A324-3T(DC 24V)
	Static Signal : Red(+), Black(-) →CLOSE Reverse Signal : Red(-), Black(+) →OPEN Model : AT12-50(DC 12V), AT24-50(DC 24V)
	Static Signal : Red(+), Black(-) →OPEN Reverse Signal : Red(-), Black(+) →OPEN Model : AT24-20(DC 24V) *Close : Manual
	Black (T-Phase) →CLOSE Common : Red (R Phase) + White (T-Phase) →OPEN Model : AT220-50(AC 220V)
	On signal of Controller(Current control) →OPEN OFF Signal (Current Control) →CLOSE Model : AT220-40P(AC 220V)

Applicable to apartment units, villa, housing, studios, motels and boarding houses. The system is convenient to use and reduces heating energy by controlling valves according the temperature of each room and time.

Application examples for apartment unit, villa and house

Studio, motel, boarding house, hospital, pension
Heated water will be supplied only to the room in which the heating control panel switch is on and the room’s heat valve, open. This is controlled at the information desk when a customer checks in, allowing for pre-heating before customer check-in with an advanced bookings. After time has elapsed, the switch can be turned off and the heat valve, closed. The system can be controlled at the information desk, reducing heating energy by only activating heating when necessary.