QC Slide is used

- To provide absolute particle numbers

- To calibrate the automatic focus

- To check the position of the slide stage

1) Activate the ADAM™ CellT QC mode using QC slide lot number and activation code.

2) Please register the QC Slide lot in the ‘QC’ tab QC slide Edit.

3) Insert the QC Slide and operate the instrument.

4) Check the result on the ADAM™ CellT QC mode screen or test report. 

How to correctly insert QC Slide

Make sure to insert the QC Slide correctly following the direction of arrow.

Data Analysis

1) The result of performance test2 should meet the ‘Acceptance range' in the QC slide.

(Example: 9.0E5 ~ 1.1E6 /mL)

2) Acceptance peak size check. (ADAM™ CellT peak graph value: 13 ~16 μm).

a. Click the ‘QC’ tab-‘SAVE’ or ‘MAIL’ button on ADAM-CellT screen.

b. Check the QC Slide peak size (See Cell Size Information) in the exported ADAM™ CellT test report.

FOR RESEARCH USE ONLY.

This product is not approved for diagnostic or therapeutic use.