*TOMs-F(T/PE)

-Oil Purification System : The Solution for Prticle, Sludge, Varnish, Acid and Water removal by One unit

Particle and water contaminations in lubricating and hydraulic oils cause serious operating problem such as shortening the life of system. Also, organic oxide such as varnish and sludge has an impact on machine failure and abnormal wear. SOLGE developed a total purifier that can monitor and control all kinds of contaminations effectively as well as lowering Acid Number.

MainFunction

1. ParticleRemoval : Removes particlewith highperformance particlefilter (betaratio1,000)
2. Varnish&SludgeRemoval  : Removes sludgeandvarnish(degradation products in solution withIonExchanged type filter (patenttechnology)
3. AcidRemoval : Removes acidwithIonExchangedtype filter (patent technology)
4. MoistureRemoval : Removes 100% of Free water& 90%of dissolvedwater withmembraneanddry nitrogen. Effectively removes water from EHC oil
5. ConditionMonitoring(Optional) : Cleanliness/Water/Viscosity/Color/Temperature

Benefit

• No failure and Long life of Machinery
• Practice Proactive Maintenance
• Reduce Maintenance & Operating Cost
• Increase Asset efficiency
• Reducewastes
  
  

General Specification

• Flow rate : 46 L/min
• Op. Temp : 40℃~ 65℃
• Power : 480ACV-3HP-3P (option)
• Viscosity : max. 220cSt(at 40℃)
• Fluid : Mineral oil, Synthetic oil(EHC)
• Others : Portable type

Parts Specification

1. Particle removal filter

- Beta ratio 1,000, Absolute Filter

- Ratings : : 1㎛, 3㎛, 6㎛, 12㎛(optional) 

2. Varnish& Sludgeremover

- Ion Exchanged type filter (patenttechnology) 

3. Acid remover

- Ion Exchanged type filter (patenttechnology) 

4.Water remover

- Portable Membrane type (Turbine/Lubricant oil)

- Dried Nitrogen into Reservoir (Control Oil/EHC) 

5.Real-time oil condition monitoring(opt.)

- Cleanliness : Laser type, ISO/SAE/Count

- Particle : Saturation % or ppm(calculated)

- Temp. :℃

- Color : ASTM D1500, Values are 0.5~8