Glaster Technology Introduction

· This technology is an adhesive pad with drastically reinforced adhesion that can be attached and detached without a mark left,

and reusable (semi-permanent).

· The existing vacuum compressed products can’t allow the air flown in to be effective,

therefore just a little change in the vacuum compression causes the adhering object to detach. GLASTER utilizes a simple adhesive pressure, therefore non-permeation of the air, humidity and moisture is not its precondition.

· Adhesion gets stronger after the lapse of time as GLASTER integrates the adhering surface and adhesive pad, avoiding the risk of the adhering matter to detach.

· GLASTER has four times as strong per unit adhesion as the existing adsorbent products. Therefore the adhering surface can become smaller, making it possible to create elegant designs for most of the living goods.

· Acquired Invention Patent after 2 years of review and assessment.

▶What is the glaster attachment pad?

As a new concept attachment method using a simple adhesive power unique to the film not by vacuum compression, invention patent was secured(As simple attachment of the pad, adhesion is semi-permanently lasted since there is no vacuum pressure on the attachment surface and subsequently air or humidity is not come in.)

If attempt to remove it by force, it does not fall apart. But once attempt as if take off, it is easily fallen apart and a mark is not  left and is possible to re-use

adhesion and sustaining power of over 4 times against the existing adsorption product (patent notice)

As time goes by, adhesion becomes stronger, on the contrary to the existing product, since integration with the attachment

▶Falling-off reason of general adsorption pad

 ▶Principle comparison between new concept attachment pad glaster and vacuum compression product

The existing vacuum compression pad is fallen off since internal vacuum pressure is gradually reduced upon temperature, humidity and time change. Meanwhile, since glaster is airtightly attached on the attachment surface, vacuum pressure is not generated then it is not fallen off even upon humidity, temperature and time change. Thus adhesion and sustaining power becomes stronger instead as time goes by.

 Glaster Product Introduction

· It’s neither double-sided tape nor vacuum compression. It’s new concept adhesion method.

· A perfect setting in different types is available in most of cases.

· It does not fall in the summer and winter, when there is a big difference in daily temperature/ humidity range.

·It is made of stainless steel and does not rust.

·Store a variety of products such as cups, cosmetics, and shampoo

·Weight capacity is up to 11lbs