Power Take Off - Power Transmission
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- South Korea
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- power transmission, pto, reducer, power take off
- Category
- Speed Reducers
Dae Deok Machinery Co., Ltd.
- Verified Certificate
-
6
Product name | Power Take Off - Power Transmission | Certification | - |
---|---|---|---|
Category | Speed Reducers | Ingredients | - |
Keyword | power transmission , pto , reducer , power take off | Unit Size | - |
Brand name | - | Unit Weigh | - |
origin | South Korea | Stock | - |
Supply type | - | HS code | - |
Product Information
● It does not happen the breakdown because it is simple structure.
● It is not frozen in winter.
● P.T.O manipulation is simple.
● It does not do wrong operation because it has a safety cover.
● ON or OFF of PTO can be checked by the lamp,
Mounting Instructions:
1. You should know car noise of in neutral.
It is needed to compare with noise after installing P.T.O.
2. Remove iron cover that is covering area in which oil plug of Transmission and P.T.O are installed.
Gasket of transmission part and liquid gasket should be removed by using knife or wire brush.
Cautions: You should implement the work with pieces of cloth into the transmission's hole to prevent a foreign
object from entering into the transmission's hole while removing the gasket and liquid gasket.
3. Remember shaked amount of the transmission gear, and then remember shaked amount with P.T.O turned on as
well. Above two shaking amount are very important data when you check backlash after P.T.O installation.
4. Set up the appropriate number of gaskets.
You should not use an adhesive between the
gaskets
to
add or
subtract a gasket for obtainning
proper
gasket.
5. The followings are method of installation of a gasket and the precautions when installing P.T.O.
1) It has to be avoided that gaskets are used 3 or more.
2) 1 gasket is usually used, but in a special case thick or thin one is necessary.
3) Because the lubricant of transmission is supplied in P.T.O, so you should be aware of leaks.
4) More than 2 gaskets may be needed for the proper backlash.
Cautions: When using more than one gasket, then you must apply liquid gasket on the other side.
6. Install P.T.O in the transmission and fasten bolts and nuts with torque 400~490kgf.cm.
Fasten the standard bolts first at this time.
7. Turn on the P.T.O and check the backlash. At this moment, this should be more than sum of backlash amount of
transmission and P.T.O mentioned on the article 3.
8. Checking the backlash is very important because it is a fundamental cause of damaged transmission and P.T.O.
9. Methods to check backlash are as the followings.
○ You can check it by moving the P.T.O output shaft without stepping on clutch when P.T.O is turned on.
○ When you step on clutch and move the P.T.O output shaft under P.T.O turned on, the shaft should be rotated
softly.
10. Once the proper backlash adjustment is completed, then fasten the standard bolts and nuts with the torque
400~490kgf.cm.
11. When using more than one gasket, then you must apply liquid gasket on the other side.
12. After starting the vehicle and stepping on the clutch without fail, turn on the P.T.O and check the noise.
13. If the noise occurs, at this moment, you should adjust the backlash again.
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- 임광철
- Address
- 127B-7L, 82, Neungheodae-ro 595beon-gil, Namdong-gu, Namdong-gu, Incheon, KOREA
- Product Category
- Speed Reducers
- Year Established
- 1974
- Company introduction
-
Leader and driveline parts business in the field of special vehicles for reducer gear through continuous innovation and technology development since its founding in 1974, is an enterprise specialized in producing
Special vehicles manufacturers leading to the products supplied by the best in technology, quality, competitive price, best leap into the corporate and special purpose vehicles parts.
Daedeok machine work enjoyment, and to share the pleasure with one that is the unity of all employees responsible for technology and quality will do.
- Main Product
Related Products
Endless Winder
Gear Reducer
Rexroth travel drive GFT60 GFT80 GFT90 GFT110
Bevel Gear Box (By-Ba-1)
Geared Traction Machine -Reducer for Elevator