WDW-T series Electronic Universal Testing Machine

1important function

1) tensile, compression, bending, torsion, shearing testing and researching with variety of metal, nonmetal material and composite material under room temperature.

2) sample of thin plate, panel, belt, foil, flat bar, wire, bar, proximate matter, pipe, sheet, square, round, rectangle, and annular shaped, cast iron, nonmetal alloy of cast iron, pipe section, proportional and non-proportional(index: k= 11.3 or 5.65), fully wall thickness of longitudinal and horizontal peeling strip, rectangle and round section.

3) tensile, compression and bending test with variety of rubber, plastic, film and other nonmetal material

4) test with variety of metal, thin metal, wire, fine wire, fiber, elastomer, foam.

5) test with textile, food, medicine, cosmetic, biological material.

6) tensile, peeling and welding strength test with electronic component.

7) test with wooden, paper, film production and other nonmetal material.

2 important specification

1) Max. Test 50N,100N, 200N, 500N, 1000N, 2000N, 3000N, 5000N

2) degree of accuracy: grade of 0.5

3) measurement range: 0.4% -- 100%FS

4) relative error of indicating value: ≤±0.5%

5) resolution: 1/±300000F.S

6) resolution of deformation: 0.1μ

7) measuring range of deformation: 0.2% -- 100%F.S

8) relative error of indicating value of deformation: ≤±0.5%

9) adjusting range of speed: 0.005% -- 5%FS.S

10) precision of speed:

If speed ≤ 0.05%FS, between ±1% of setting value.

If speed ≥ 0.05%FS, between ±0.5% of setting value

11) adjusting range of speed of deformation: 0.005% --5%F.S/S

12) precision of speed of deformation:

If speed ≤0.05%FS, between ±1% of setting value

If speed ≥0.05%FS, between ±0.5% of setting value

13) adjusting range of speed of displacement:

0.001 -- 600mm/min(customized high speed system 0.001 -- 1500mm/min)

14) precision of speed of displacement: between ±0.2% of setting value

15) control range of constant force, strain and displacement: 0.5% -- 100%F.S

16) control precision of constant force, strain and displacement:

If setting value ≥ 10%F.S, between ±0.5% of setting value

If setting value ≤ 10%F.S, between ±1% of setting value.

17) moving stroke of cross beam: 0 -- 1000mm