Brief Introduction: 

Adamite Steel Rolls are mainly composed of fine pearlitic matrix with some cementite in the structure. The structure consists of well broken up and dispersed carbides in a pearlitic matrix complementing the hardness and wear resistance imparted by highly alloyed matrix. They typically have great strength, good thermal properties and high wear resistance. Unlike other Metal Rolls, these have uniform hardness from depth to the surface which makes them very special. Hardness of these Rolls is maximum amongst the steel based Rolls. These Rolls are statically cast and go through multi stage heat treatment process (Annealing) followed by Tempering phases in order to develop the combination of hardness, toughness and wear resistance required for heavy duty wear applications. 

Application:

• Section finishing, wire rod intermediate rolling.
• Roughing stands of strip mills.
• Medium and small blooming rolling.
• Wire rod and bar steel roughing.

Material Spec:

Adamite Rolls ASB 1 ASB 2 ASB 3
Composition (%Wt)
Carbon (C) 1.40-1.60 1.50-1.80 1.60-2.00
Silicon (Si) 0.40-0.70 0.30-0.70 0.30-0.70
Manganese (Mn) 0.50-0.80 0.50-1.00 0.50-1.00
Nickel (Ni) 0.40-1.00 0.70-1.10 1.50,MAX
Chromium (Cr) 0.80-1.20 1.00-1.40 1.10-1.60
Molybdenum (Mo) 0.20-0.40 0.20-0.40 0.25-0.50
Mechanical Properties
Hardness (HSC) 40-45 45-50 50-55
Tensile Strength (N/mm2) 500-700 500-700 500-700