Product - IR3 Flame Detector _ IP CCTV
Model - I3IP-11-01

There are two wavelength from UV and IR which is generated when the fire occurs. If both sensors detect the wavelength, it means the fire breaks out then the product’s transmitter forwards the signal and alarm. There are many factors which looks like the fire such as welding, halogen lamp, heat from stove and flame of grinder. This can choose whether the sign is real or not and it is possible to expedite the alarm. With visible light sensor, high quality digital Light Lux feature(automated brightness control) and embedded high quality digital temperature sensor(in case of malfunction in high-temperature area), the monitoring area is enlarged to 50m distance and 100° monitoring angle, in comparison to original feature, 30m distance and 100° monitoring angle. By achieving the 3m close-distance welding, it makes fire surveillance more rapid and more correct in wider range and more unstable of industrial circumstances regardless of indoor area or outdoor. 

Equipped with 2.0 megapixel HD-IP camera, anyone can notice the moment the fire and can check the circumstances before and after the fire at control room or with supervisor’s smartphone. Then you can figure out the reason of fire. 

Using the motion sensor, you can monitor the invasion of others and the site which might be dangerous or lonesome. So, you can prevent the secondary accident and it is also cost-effective on personnel. Because currently existing CCTV on site has low-definition, it is hard to make decision correct about the accident and it is needed certain equipment to forward the video. But our product overcome these disadvantages through high-definition and the Internet.