Waste tyre oil extraction pyrolysis plant can transfer the waste tyres into oil in normal pressure.In general 2.5ton waste tyres can get 1ton fuel oil .The  waste tyre oil extraction pyrolysis plant productiong fuel is no pollution to the air ,the  waste tyre oil extraction pyrolysis plant not only solve waste tyre pollution in many country but also can bring much profit for you.

First, the raw materials are put into the reactor and seal the doors in the reacto
Second, start the machine and reactor will rotating and be heated. When the inside
temperature reaches the degree of 250 to 280, the oil gas will begin to generate while flow through oil gas separator, and continuously produce until the temperature up to the degree of 350 to 460.
Third, in oil gas separator, light component will enter the condensers, meanwhile,
heavy component will be liquefied and then automatically discharged into heavy oil tank
Forth, most of the light component will be liquefied through condensers to crude oil.
Small amount of oil gas cannot be liquefied and will be transferred by water seal tank back to the burning.After all these steps, you can start another batch. 

1.Fuel Oil (40% to 45%)
The main application of oil products produced by our waste tyre oil extraction pyrolysis plant is the fuel oil that is wide used for industrial and commercial purposes. Such as power plant factory,glass factory,cement factory,ceramic fatory.

Exhaust gas (About 10%)
We get about 10% pyrolytic gases during pyrolysis process. The main component of this gases are methane (CH4), so we can not condense and store this gases. We use this gases to heat the reactor and we can use exceed gases for other heating application.

Steel Wire (10% to 15%)
The third product of waste tyre oil extraction pyrolysis plant is steel wire, the quantity of steel wire is about 10% to 15% according to tyre quality. It is very easy to sell steel wire scrape in local market.

 Carbon Black Powder (30% to 35%)
The second product of waste tyre oil extraction pyrolysis plant  is carbon black. The quantity of carbon black is about 30% to 35% according to tyre quality. Carbon black can application to electric cable jacketing,black nylon bag,rubber additive.

Contact: Ms Bonnie
Phone: +86-371-5677 1821
       +86 15893800169
Skype: bonniezhao2