In laying hens to ensure good environmental conditions of feeding and management , poultry house dimensions of the design is reasonable , to play the performance of laying hens has played a very important role in laying hens cage factory shandong tobetter to introduce you to the structural design of the poultry house dimensions . 

   Layers monomer cage size , usually before high 42cm, after 35 cm high 37 cm deep cage , the cage width ( cage length ) by food and water depending on the location ( per bird ; feeding position 10 cm calculation ) . Usually cage width 42-45 cm ( 4 to raise light layers , three layers of medium ) , about 1.0 degree slope bottom of the cage , the cage protrudes egg collection groove 12 of a 16 cm    Hens cage around the top and bottom side network components. Net placement manger and sink. In order to facilitate chicken feed and water available diameter of 3 mm galvanized wire welded into a vertical fence , the distance between the gate and 5-6 centimeters from the lower edge of its network at the end of the leave 4-5 cm gap to get out , to facilitate the production under eggs get out in time . In order to facilitate catch the chicken , usually before the Internet to open the kennel , kennel lead wire of some coarse .

   After the network and the network side mainly for cages interval , usually used in conjunction with the adjacent cage . In order to prevent beheaded chicken cages and extending adjacent fighting, wire mesh should be horizontally aligned mainly to pitch three centimeters , the other with a few from the vertical wire reinforcement and support role.

  If you want to know more about poultry house dimensions please call our