Feature

   ■ As a simulator education unit equipped with fuel, cooling, suction,
      exhaust systems of gasoline and CNG engine, enable to do various
      theory educations and practices.
   ■ Easy to check and diagnose all faults that can happen in an actual
       vehicle system so that it's able to do effective education concerning
       maintenance system
   ■ Is the best model to see operation state and location of components
       by making parts which aren't seen at an actual one open.
   ■ Manometers for education of circuit operation according to shifting
       process are installed at each hydraulic line of A/T ranges
   ■ Test using diagnosis is available because checking sockets for education
      are installed at automotive electric circuit and each sensor.
   ■ Exhaust muffler is specially designed with heat-resisting paint
      to be maintained at high temperatures up to 600℃.
   ■ The entire process of ISO9001 and D.C.C.A.P.T of TQC method of
      YES01 are applied in manufacturing.

Specification

   ■ Composition
      1) Gasoline / CNG remodeling engine assembly
      2) Auto transmission assembly
      3) All electronic devices relevant to starting
      4) Fuel tank (LNG gas), DC 12V car battery and generator
      5) Cooling device such as radiator, electric fan, overflow tank and
          relay and antifreeze.
      6) exhaust system such as catalyst convertor and silencer
      7) Operation switch(Key S/W), anti-vibration damper and urethane wheel
      8) Control box(for measurement of waveform), fuel tank(separate type)
           and accelerator lever
      9) Installment of safety guide of stainless molding type
      10) Standard stand for radiator / Laser-processed protection panel
      11) Hydraulic gauge of each shift of auto transmission ？6
            (1.5MPa？3 / 2.5Mpa？4)
      12) Vacuum and pressure gauge ？1 (0.1Mpa)
      13) Fuel pressure gauge ？1 (1Mpa)
      14) Battery voltage gauge ？1 (30V)
   ■ Size : Approx. 1500 X 1200 X 1200 (L x W x H, mm)
   ■ Weight : Approx. 500kg

Training Contents

   ■ Various practices by self-diagnosis.
   ■ Various practices by self-diagnosis
   ■ Operation, measurement and inspection of auto transmission
   ■ Measurement and inspection of oil pressure at each A/T range
   ■ Measurement of exhaust / Measurement and inspection of
     compression pressure of cylinder
   ■ Measurement of Radiator cap pressure / Radiator leak test and
      inspection
   ■ Operation test of Fuel pump / Measurement and inspection of Oil
      pressure
   ■ Measurement and adjustment of tensions of timing chain and fan belt
   ■ Measurement and inspection of voltage and current of various
      circuits such as charging circuit and maneuver circuit
   ■ Connector-checking socket for inspection of sensors and actuator
   ■ Inspection of every part of suction and exhaust system
   ■ I nspection of every part of each automotive electricity, fuel system,
      ECU, sensors and actuator
   ■ I nspection of every part of cooling system, belt and all kinds of pumps
   ■ Inspection of the rest of parts