Plastic deep groove ball bearings POM6307
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Brand name
- MOTN
- Payment Terms
- L/C,T/T,Western Union
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- pom6307, pom plastic deep groove ball bearing pom6307, 35x80x21 plastic ball bearing pom6307, nylon plastic ball bearing pom6307
- Category
- Ball Bearings
Motion(Shanghai) Industrial Development Co LTd
China
- Verified Certificate
-
9
| Product name | Plastic deep groove ball bearings POM6307 | Certification | - |
|---|---|---|---|
| Category | Ball Bearings | Ingredients | - |
| Keyword | pom6307 , pom plastic deep groove ball bearing pom6307 , 35x80x21 plastic ball bearing pom6307 , nylon plastic ball bearing pom6307 | Unit Size | 35.0 * 80.0 * 21.0 mm |
| Brand name | MOTN | Unit Weigh | 0 kg |
| origin | China | Stock | - |
| Supply type | - | HS code | - |
Product Information
MOTN Bearings offers a wide variety of polymer bearings
to suit your needs from standard industrial sizes to custom designs. Our
standard material is POM and we have a selection of pre-approved alternative
materials available when POM will not work in your application. These materials
are PEEK, PTFE, PBT; PP; UPE, PI. Contact MOTN to select the material that is
right for you.
| POM & PA Material | Descriptions | POM(Polyoxymethylene) can be used in temperatures ranging from -60℃ to +100℃. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). | |
| Structure | Rings | POM、PA | |
| Retainer | PA66、POM | ||
| Rolling elements | Glass ball; Steel Ball;ZrO2、440C、304 | ||
| Temperature | from -60℃ to +100℃ | ||
| PTFE Material | Descriptions | Very
corrosion resistant plastic bearing materials including PTFE and PVDF,
including PTFE is all known engineering plastic in corrosion resistance the
best, can be used for all the strong acid and strong alkali occasions,
including HF, fuming sulfuric acid (more than 98%) and concentrated nitric
acid, etc. Relative PTFE, PVDF have better mechanical properties and high temperature properties, can be in 150 ℃ under normal use. |
|
| Structure | Rings | PTFE | |
| Retainer | PTFE | ||
| Rolling elements | Glass ball; Steel Ball;ZrO2; Si3N4; SiC | ||
| Temperature | the highest can get 150 ℃ | ||
| PEEK & PI Material | Descriptions | PEEK and PI as the new engineering plastics materials, was proved to be all known engineering plastic in mechanical strength size stability and high temperature resistant performance of the best, of which PEEK the long-term use of temperature up to 260 ℃, PI long-term use of temperature is up to 300 ℃, and it has excellent corrosion resistance, medium strength in acid and alkali corrosion environment can still run freely. Compared with other plastics PEEK and PI have high strength and stiffness, excellent toughness (also is suitable for low temperature conditions), high temperature resistant performance, high temperature dimensional stability, etc. | |
| Structure | Rings | PTTEK;PI | |
| Retainer | PTFE;PEEK;PI | ||
| Rolling elements | Glass ball; Steel Ball; ZrO2; Si3N4; SiC | ||
| Temperature | The highest can get 260 ℃ | ||
| PP;HDPE;UPE Material | Descriptions | Acid and alkali resistant plastic bearing HDPE, PP, UPE materials in addition to have general plastic bearing the oil less self-lubrication, no magnetic and insulation, such as performance, also have good resistance to acid and alkali performance. But this plastic mechanical strength is low, easy to deformation, therefore, this kind of resistance to acid and alkali plastic bearing does not apply to large load and high speed. In comparison, UPE material has better strength, low friction properties and low temperature application characteristics (lowest to - 150 ℃), USES the most widely. | |
| Structure | Rings | HDPE;PP;UPE | |
| Retainer | HDPE;PP;UPE | ||
| Rolling elements | Glass ball; Steel Ball; ZrO2; Si3N4; SiC | ||
| Temperature | The lowest can get -150 ℃ | ||
| Performance | •high
tensile strength and rigidity & with great mechanical performance •Self-Lubrication(no need grease and oil) •low density (light weight) •good heat resistance and thermal stability •high corrosion resistance (acid/alkali/salt/solvent/oil/gas/and sea water corrosion environment) .insulating properties (Non-Electrical Conductive; electricity leakage) Can be used as high insulating medium |
||
| Applications | Gear wheels, parts for pumps, screws, parts for the textile industry; The microelectronics industry, chemical, electroplating, pickling, semiconductor, piston rings, valve seats, gears, seals, aviation, plug connectors, wafer carriers. Pumps, Food Machinery; household appliances | ||
- Product Info Attached File
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | L/C,T/T,Western Union | Shipping time | Negotiable |
- President
- Mr.Chou
- Address
- Room 503 Building 7 No. 277 YongDeng Road Putuo District Shanghai China Postal Code 200331
- Product Category
- Ball Bearings,Needle Bearings
- Year Established
- 2006
- No. of Total Employees
- 1-50
- Company introduction
-
Motion (shanghai) Industrial development Co.Ltd ONLY focuses on Bearings and transmission products with its registered brand “MOTN”; we offer a very comprehensive and extensive range of products; all parts in the areas of bearings; power transmission; linear technology; sealing technology and technical industrial suppliers are available both as a h high-tech version or low-price brand.
we have constantly expanded our product range and today offer you numerous manufacturer independent products in the field of rolling bearing technology - from high-tech to low-price brand. We consistently focus on best quality and reliability of reputable manufacturers.
We will audit every manufacturer we are going to work with. Our manufactures are all ISO 9001 Certificated
Our Principe: Sincerity, Honesty and Responsibility to every of our client
- Main Markets
-
Austria
Belgium
France
Germany
Italy
Malaysia
Netherland
South Korea
Spain
- Main Product
Related Products
FAG NTN NSK KBC bearings
Enduro Bearing
KBC BEARING - BALL BEARING, TAPERED ROLLER BEARING
Torrington Bearing
Compound Bearing (Solid Lubricant Bearing)
