OFF Line 8CH UT System

Pulse Voltage

-40V to -300V, 256 steps. Higher voltages are available upon request.

Pulse Width

50 ns to 484ns, 256 steps

Damping

500 Ohms, or 50 Ohms

Internal Trigger

1 Hz to 5000 Hz in 10 Hz increments when internal trigger is selected.

Receiver Gain

0 dB to 80 dB in 0.1dB increments,

or 0 dB to 40 dB fixed and 0 dB to 40 dB DAC.

DC Offset

-2.5V to 2.5V in 5mV increments

Low Pass Filter

All, 48MHz, 28MHz, 18MHz, 8.8MHz, 7.5MHz, 6.7MHz, or 5.9MHz

High Pass Filter

4.8MHz, 1.8MHz, 0.8MHz, or 0.6MHz

Waveform

Full rectify, + half rectify, - half rectify, or RF

Trigger Source

external, internal, or software

Transducer Mode

Single (pulse/echo) or dual (through transmission)

Dimensions

12.5"x4.25" not including BNC and PCI edge connectors

Connectors

BNC connectors: 4 Pulse out, 4 receiver in,

1 signal out, and 1 external trigger in.

Add-on Options

BNC trigger-sync output connector

Immersion Probe

Frequency: 10Mhz, Element Dia: 0.125”

Power input

Three Phase 380V ±5% 60/50Hz ±0.5% 10KVA

Control Voltage

AC110V/220V &DC24V

WATER SUPPLY

15A 100ℓ/Day

Logarithmic amplifier

Up to 4 encoder counters and connectors

High pulse voltages

Distance amplitude correction (DAC)

Software development kits