GSM Intelligent Home Security Burglar Alarm
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Lithuania
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Category
- Industrial Equipment Alarms
UAB 'Topkodas'
Lithuania
- Verified Certificate
-
10
| Product name | GSM Intelligent Home Security Burglar Alarm | Certification | - |
|---|---|---|---|
| Category | Industrial Equipment Alarms | Ingredients | - |
| Keyword | access control , security system , gsm sms alarm system , smart home house | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | Lithuania | Stock | - |
| Supply type | - | HS code | - |
Product Information
The GTCOM transfers messages about events of the security
system to the mobile phone of a user via
GSM communication channel. The module receives Contact ID DTMF codes from the
dial-up communicator of security control panel, converts them into readable
texts and sends SMS message to the mobile phone of a user.
Upon alarm occur, the module will generate SMS message about
alarmed sensors. Door, PIR, Fire etc. SMS message is being sent to a user
in-line with a short call. This is to reduce the probability that a user will
not observe SMS message.
It is possible to send SMS and to call to 16 users. The
algorithm of message sending is MS1,SMS2...SMSn till all SMS
messages will be
send. After DIAL1,DIAL2....DIALn. All
messages are being
sent until all
users will be notified
about the event.
Preferred messages and texts of
these messages should
be defined when
programming the module.
The module understands when the call is rejected and will
not repeat calling. When the module is calling to the user’s phone, the user
can not reject the call at least 15 seconds. Other wise the module will
understand that the user’s number is busy and will try to repeat the call
again. In a case the user’s number is busy in fact, the module will make
repetitive calls following the programmed number of calls. Efficiency of this function depends on
interpretation of call control by the
operator; in some
cases the operator
may wrongly interpret
the call and
thus the module
will make repetitive calls each
60 seconds, following the programmed number of repetitions (by default 3
repetitions) . In such case GSM operator may be changed or simply the amount of
DIAL repetitions reduced.
Parameters of the module are set by sending SMS or via PC by
using standard mini USB cable and configuration software SERA. In order
to activate voice
listening it is necessary to
call from a
user’s telephone number.
When calling, the module
will immediately activate voice
listening, which will last as long as the user
will reject the call or when the module will
start performing other
commands. Calls from
other telephone numbers
(of non-authorized users)
are ignored.
- Product Info Attached File
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Kestutis Repecka
- Product Category
- Access Control System
- No. of Total Employees
- 51-100
- Company introduction
-
We are manufacturing electronic equipment with such application areas:
• Individual protection of houses, garages, cottages, boat and other premises;
• Remote monitoring and control of premises via GSM network;
• Access control. Gate/door control;
• Automation of premises, temperature and voltage control;
• GSM thermostat for premises and heating systems;
• GSM thermometer;
• Remote voice listening;
• Receiving of Contact ID codes from the security control panel and their converting into SMS readable format.
• Remote monitoring and control of vehicles, motorcycles, boats or other vehicle as well as for their protection via GSM network.
• Vehicle GPS tracking by transferring info via GSM network in a form of SMS.
- Main Product
