SELF TAPPING THREADED INSERT -

MANUAL INSTALLATION TOOLS

STEP 1.

Drill the hole, screw insert on to the tool with slot pointing downward.

STEP 2.

Maintaining the tool perpendicularity, rotate the tap clockwise & screw its way into material.

STEP 3.

Back out the tool anti-clockwise & it will automatically release from the insert.

1. HOLE SIZE:

Recommended hole size is indicated on each data sheet and is intended to be for reference only. Hole size may need to be increased or decreased depending on base material, installation torque or performance required. Optimum hole size should be determined by requesting samples & installing them in the intended material.

2. HOLE DEPTH:

In thru hole applications the insert length should not exceed the material thickness. In blind hole applications the hole depth should be 1.2xinsert length and this value is indicated on most data sheets.

3. COUNTERSINK

A 60°countersink is required for most materials to insure a flush surface after installation.

4. WALL THICKNESS

Wall thickness should be 0.35 to 0.5 x hole diameter depending on base material.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST