Dream 6000

Even if the room tremble teeth it?
I so cold blanket covering the head up?
Now do not tremble in the cold.
I'll give you Dream 6000 insulation wallpaper.

│Description│

Cute, pretty, thin, and elegant design, thermal insulation effect is obvious wallpaper.
Wallpaper to finish the film and enhance insulation effect.
Our products reduce the temperature difference between outdoor and indoor.
Therefore helps to save heating costs.

│How to use│

1. Construction of the wallpaer to the wall to clean up and remove the mold.
2. Pre-cut to fit the wall construction to be.
3. Construction adhesive to the back of the vinyl wallpaper that removes insulation foil and attach it adheres to the wall surface.
4. Mode waist up, down, around windows, etc.
   must be bonded to silicom or 10cm~15cm apart in a zigzag pattern, you must correct the installation.

│Feature│

1. Factory direct, Korea genuine
2. Paper for the film coating to reduce the hassle of installation of wallpaper
3. Anyone can easily construction
4. Easy to clean vinyl-coated
5. Heating savings (savings of 30% to 50%)
6. Non-detection of hazardous substances
7. Room wall, apartment balcony veranda, warehouses, offices, containers, etc.can be constructed in several places
8. Width 1m x Length 3m x Thickness 5mm

│If you have an existing wall wallpaper│

1. Existing wallpaper (paper, laminated wallpaper) is still attached
   without lifting off phenomenon mode
   - After cleaning, wipe completely dry construction products
   
   
2. In mold wall construction is
   - Bleach mold or mildew remover and then wipe completely dry construction products

※ Wall paint, cement wall, the Premier (Wall Waterproof Coating) to paint with a brush or roller to paint as if, thinly painted on the front of a cement wall and then dried over an hour, fully insulated wall paper construction.

│Notes│

1. On the cement wall and paint the wall insulation binder,
   ?if you apply the wallpaper without the subsequent construction fall hazard.
   
   
2. Walls of concrete and paint, plywood wall panels severe cold bond and silicon insulating board on the wall thickness of 5 ~ 10cm painted zigzag construction after you better.
   
   
3. Corners of the silicone adhesive strength reinforcement is necessary
   because no matter how strong or continuous contact,
   even when the foundation could fall because adhesion.
   
   
4. Remove all the plastic before attaching the wall and stick to the risk of missteps here and there, so do not keep your vinyl in advance against the wall and then cut and paste the right to remove vinyl construction before us.
   
   
5. Approximately one day after construction is required to give adequate ventilation.