DESCRIPTION

Tiger Foam B1 (G)  is Gun type, a polyurethane-based fast curing expanding foam.

USES                           

• Filling gaps and voids that occur around the home and during building construction

• Installation of window and door frames

• Insulation of pipes

FEATURES

• Excellent adhesion on most materials (except PE/PP, Silicone, Teflon)

• High thermal insulation and sound absorption

• Very good filling capacities

• Quick and easy gap filler

Product information

• Color: Pink

• Shelf Life: 12 months in un-opened from original packaging

• Storage Conditions: Store at temperature between +18 ℃ and +22 ℃.

TECHNICAL information

APPLICATION INSTRUCTIONS

SUBSTRATE PREPARATION

▪ The substrate must be free or dust, grease, oil and surface contaminants.

▪ The surface should be pre-moistened with water before application to ensure that:

(a) The foam cures at an optimum rate, and

(b) Secondary foam expansion is prevented.

APPLICATION METHOD / TOOLS

▪ Screw the foam applicator onto the can

▪ Shake can thoroughly (approx. 20 times) before use.

▪ Apply foam by pointing nozzle into area to be filled and depressing. It can be applied valve up or down.

▪ Foam will dispense rapidly and will expand 1.3  times its size as it comes out of the can

▪ The quantity of foam can be regulated by varying the pressure on the adaptor.

CLEANING OF TOOLS

▪ Remove fresh spots of foam immediately using acetone or foam cleaner.

▪ Cured foam can only be removed mechanically.

STORAGE AND SAFETY

The aerosol cans must be stored in a vertical position under room temp. Content under pressure. Exposure to temperatures over + 40 °C may cause bursting. Contains diphenylmethane-4,4’-diisocyanate. Harmful by inhalation. Irritating to eyes, respiratory system and skin.

SAFETY MEASURES

• Apply the usual industrial hygiene.

• Wear gloves and safety goggles

• Remove cured foam by mechanical means only, never use a burner.

• Do not touch the surface during the curing time at frost temperatures.

• Always moisten surfaces before application in order to improve curing and cellular structure

• Cured PU Foam must be protected from UV radiation by painting.

Limitations

Tiger Foam (G) does not adhere to Teflon, polythene, silicone or grease.

For special uses, test Tiger Foam (G) in advance.

Aged material can yield up to 30 % less than the specified value.

BASIS OF PRODUCT DATA

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.