【YBS Nozzle】offer 3/4BD-SS5,5 nozzle,BD in-line spray nozzle and other products

Whole a discharge curve , which is calculated out of electricity is not accurate . So it is necessary to calibrate the battery charge and discharge deep chips . I have the following views on the maintenance of the battery : 1. No need to ensure every industrial nozzles are fully discharged before charging : 2. ~ Segment times when asked to do deep under the protection circuit to control the charge and discharge the battery to correct the statistics , but it will not improve the actual capacity of the battery ; 3 . Long-term without the battery , should be placed in a cool place to weaken its own internal passive reaction speed ; 4. Protection circuit is also able to monitor the battery self-discharge , long strokes without the battery , should be filled with a certain amount of power to prevent the battery self-discharge during storage of excess leads to excessive discharge . In fact, hollow cone nozzle computer battery is not too much to take into account the use of attention. The number of times a battery can be used , perhaps more differences from the individual differences in the manufacture of the battery itself , instead of using the method . Select the hollow cone nozzle has a good reputation computer brand , is undoubtedly one of the guarantees for future long battery life.

Ordering information of BD in-line spray nozzle (YBS brand)

Dual inlets, each in diameter specified

Materials：None=brass

                 SS=303 stainless steel

 3/4 3/4BD-5 3/4BD-SS5

3/4BD-8 3/4BD-SS8

3/4BD-10 3/4BD-SS10

3/4BD-15 3/4BD-SS15

3/4BD-20 3/4BD-SS20

3/4BD-25 3/4BD-SS25

3/4BD-50-50.3 3/4BD-SS50-50.3