Garbage Disposal

│Basic Information│

│Direction for the Use│

1. Keep a Disposal machine horizontal with the floor by controlling the wheel height.
2. Avoid a direct ray of light and a humid place.
3. Avoid the place of freezing temperatures or more than 40℃.
4. Keep some space around a Disposal machine.
5. The basic voltage is 100V 50Hz. Check it before using the Disposal machine.
6. Connect the water supply pipes for water supply and cleaning on the right upper back of machine. The upper is for water supply and the down is for cleaning.
7. Connect the socket with drain water connection on the left of machine, and use.

│Screen Dispaly & Button│

Button	Description
	Auto/Manual : Operation mode change on pushing for 3 seconds
	Operation/Stop : Push for 3 seconds
	Temperature : Display the temperature 3 seconds
	Counterturn : Motor counterturn in manual mode
	Cleaning : Water supply for cleaning in manual mode
	Turn : Motor turn in manual mode
	Water Supply : Water supply in manual mode
	Up : The setting value increase in setting mode
	Set-up : Time set in manual mode
	Down : Set-up value down in set-up mode
	LED Lamp : Operation condition
	Turn : Lighting when a motor turning in auto mode, putting a turn switch in manual mode and setting the time in set-up mode
	Water Supply : Lighting when supplying water in auto mode, putting a water supply switch in manual mode and setting the time in set-up mode
	Heater(Option) : Lighting when heating in auto and setting the temperature in set-up mode
	Auto : Lighting in auto mode and when setting the time in set-up mode
	Counterturn : Lighting when a motor counterturning in auto mode, putting a counterturn switch in manual mode and setting the time in set-up mode
	Cleaning : Lighting when draining water in auto mode, putting a drain water switch in manual mode and setting the time in set-up mode
	Stand by : Lighting when standing by the operation in auto mode and setting the time in set-up mode
	Manual : Lighting in manual mode

│How to Operate│

1. Power Off
2. Power On
3. Automatic Operation
   - Auto mode when putting the Auto/Manual button for 3 seconds in stop of auto mode.
   - The LED of auto operation, turn, water supply and heat is lighted and the auto mode and time is shown on LCD when putting the operation/stop button for 3 seconds.
   ※ 1 Cycle: Turn 5minutes (Water supply 50 seconds) in auto mode → Stand by 15minutes (Cleaning 30seconds). Control the time of each mode properly.
4. Manual Mode Operation
   - Manual mode when putting auto/manual button for 3 seconds in stop of auto mode. Then the manual LED is lighted, and the Disposal is operating when putting the each item button and the operation is stopped when putting once.
   - Auto mode when putting auto/stop button in manual mode.
5. Door Sensor Operation
   - Opening door gets stopped all operations in auto/manual mode, and then “Door Open” is shown on LCD. Closing door gets operated to the initial operation mode in auto mode.(Motor turn, Water supply)
6. Power Supply Function
   - Note when the power is supplied again after stopping the power on operation (power failure, switch off..) in auto mode, the initial operation is worked in auto mode.

│Notice│

1. Do not touch the power cord with wet hands.
2. Pulling the power cord can be occurred the problem on firing and supplying the power.
3. Contact to A/S center or where to buy for any problem of a power cord.
4. Do not disassemble or make over the Disposal. The troubles by user’s disassembly or reassembly are not rewarded.
5. Do not put the hands into a garbage supply.
6. Be careful not to touch and eat the microbes for children.
7. Do not put the others except for food garbage in a Disposal. The machine can be down.
8. Be careful the microbes can be died by the hot water, the strong detergent and petrochemicals.
9. The microbes have to be supplemented because the microbes do not act on smelling bad.
10. Do not be over 30kg a day.

※ The prohibitive garbage