1. Instruction for Safety

[Instruction for safety]is intended to prevent any potential accident or danger by using the product in safe and proper manner. We recommend you to observe it without fail for your safety.

• If any side effect occur, stop using this product.
• Patients having infectious disease, heart failure, abnormal blood pressure, skin disorders or skin diseases need to consult with a medical specialist before using this product.
• If you are using any medical supplies or have peeling skin, consult your dermatologist, before using this product.
• Do not use in the high temperature or humidity place.
• Keep this product away from water or fire. Shock hazard when wet.
• Do not use to a child or person unable to communicate.
• Do not drop, disassemble, repair or rebuild the product. It may cause damage or malfunction.
• Charge the battery when you use the product at first after purchase.
• When the LEDs blink during operation, charge the battery.
• When you dispose this product, it has to be separately collected and recycled.

2. Product information

• Model Name:Derma f++
• Size: 54mm x 162mm x 17mm
• Weight: 97g
• Source:Li-polymer 3.7V/250mA
• Charging time:Under 60min
• Charging rate:5V/300mA
• Storage Temperature:-20°C~ 60°C(-4°F~140°F)
• Storage Humidity:20% ~90%
• Electrical Insulation grade:Class II/BF
• Transportation Atmosphere:700hPa~1060hPa

3. Function and How to Charge

1. Function
   - This device can help to care skin effectively with micro bubble jet energy, ultrasonic energy and electric property of ion. It is composed of three mode, soft peel and cleansing, lifting and nutrition. All function can operate by touching one switch, so it is simple and convenient.
2. How to Charge
   1) By computer USB cable Turn on the computer, and then connect the USB cable to the charging port. And LED will turn on. When the charging is complete, LED will blink.
   2) By adapter Connect USB cable to adapter as follow and put the plug. The adapter must be followed specification.
   - 5V/ over 300mA source - meet to UL or EN60601 spec

4. Soft peel & Cleansing Mode

1. In this mode the device produces more than 24Khz ultrasonic and when it meets water the bubble jet phenomenon is occurred in the water molecule. The bubble jet penetrates to inside a stratum corneum and separates it from stratum lucidum.
2. How to Use
   Step 1.
   . After turning on the power, touch the power switch one more time. And soft peel & cleansing LED will turn on. This means the mode is starting.
   Step 2.
   . Wet the skin with water.(You can use gauze or cotton.)
3. Step 3.
   . Apply the scrubber blade to the skin and rub the skin as follow. One treatment time is 5minutes. After that time, the device is turned off automatically.

5. Soft peel & Cleansing Mode

1. In this mode, the device helps to absorb nutrients such as vitamin C and mineral ingredients. So when you treat in this mode, it is effective to apply cosmetics such as whitening cream which contains vitamin C, retinol, or tocopherol.
2. How to Use
   Step 1.
   . After turning on the power, touch the power switch two times. And nutrition mode LED will turn on. This means the mode is starting.
   Step 2.
   . After apply nourishing cream or mask pack, apply the blade to the skin and rub the skin as follow. It is good to roll like massaging, also better to spot 2~3seconds. Since the massage current flows through hand terminal, your finger should be touched in there. If you wear the glove when you use this device, there is no ion effect. One treatment time is 5minutes. After that time, the device is turned off automatically.

6. Lifting

1. In this mode, the device generates positive ion and it helps minimize pores, to increase skin elasticity, and it eliminates the fine lines and wrinkles.
2. How to Use
   Step 1.
   . After turning on the power, touch the power switch three times. And lifting mode LED will turn on. This means the mode is starting.
   Step 2.
   . Apply the blade to the skin and rub the skin as follow. Since the massage current flows through hand terminal, your finger should be touched in there.
   If you wear the glove when you use this device, there is no ion effect. One treatment time is 5minutes.
   . After that time, the device is turned off automatically.

Specification

• Size:54x162x17mm
• Weight:97g
• Power Source: Lithium Polymer Battery:3.7V/250mA
• Charging time:60min
• Usage time:5min
• Charging rate:5V/300mA
• temperature for storage: -20°C~60°C
• Humidity for storage:20% to 90%
• Electrical insulation grade: Class II/BF
• Transportation atmosphere:700hPa~1060hPa
• Materials:
  - Case:ABS
  - Treatment Blade:SUS
  - Battery:Li-Polymer 250mA/3.7V

Product description
Derma -f is ultrasonic micro dermabration device for home or professional use. With the help of micro bubble jet
energy, ultrasonic energy and the electric property of ion our Derma -F combines 3 professional grade cosmetic
treatment device in 1.

1.soft Peel & cleansing mode:In this mode the device produce ultrasonic waves, and when the tip meets water
a bubble jet phenomenon occurs within the water molecule, helping to remove dead skin cell. The bubble jet
penetrates inside the stratum corneum and separates it from stratum lucidum.(To use the soft peel& cleansing
mode, simply wet your skin with water before use)
2.Nutrition mode: In this mode the device helps to absorb nutrients such as for instance vitamin C or mineral
ingredients into the skin. Ultrasound is used to push nutrients deep into the skin. You should touch the side of
the device to allow the current to flow through for and ionising effect. One treatment takes 5 minutes.
3.Lifting mode: In this mode the device generates positive ion which helps to shrink the pores to increase skin
elasticity and eliminate fine lines and wrinkles. One treatment takes 5 minutes.

Size:54x162x17mm
Weight:97g
Power Source: Lithium Polymer Battery:3.7V/250mA
Charging time:60min
Usage time:5min
Charging rate:5V/300mA
temperature for storage: -20℃~60℃
Humidity for storage:20% to 90%
Electrical insulation grade: Class II/BF
Transportation atmosphere:700hPa~1060hPa

Materials:
Case:ABS
Treatment Blade:SUS
Battery:Li-Polymer 250mA/3.7V