Model Number JSM 100 TO 600 Pipe Gas Cutting/Bevelling Machine The pipe gas cutting machine is designed to tackle harsh site conditions ,so is made of all steel construction. Accesibilty to the clamping chain is easy and straight forward also this machine does not need any special design chains, it uses chains which are readily available. Machine Operation Select proper?clamping chain as per diameter now slide the machine along with chain on to the pipe, now tighten the nut on top to tighten the chain. Adjust cutting torch to requirement , start gas supply to ignite torch adjust flame length with the height adjustment knob.You are now ready to start cutting of the pipe . So now start rotating the handle given on to the side which starts indexing the machine on the pipe diameter. As the machine rotates along the diameter the torch now cuts the pipe . You can also do bevelling by adjusting torch angle, bevel degree from 35degree to max 45 degree For Stainless Pipe Cutting and Bevelling use Plasma Cutting Torch and Plasma Cutting Machine Fixed length chains supplied readily with machine for standard pipe diameters. Machine mounts on Pipe OD and on rotating handle indexes around the pipe simultaneously cutting the pipe. Min OD 100mm to 600mm OD. Horizontal movement of the torch is 125mm. Vertical movement of torch?is 70mm. Weight of the machine is 13 kgs Manufactured by JIN-SHAA MACHINES 83/10 RAHUL APTS LAW COLLEGE ROAD ERANDWANE PUNE 411004 India ?Contact? Sudarshan?J?Patil???cell no +918975768613 Please visit at?http://jinshaa.en.ec21.com/