Features of NMG Turbo Warm Air Circulator

1. Warm, clean, heated air is supplied continuously.

-Heat exchanger system provides high-quality heated air not mixing with the exhaust gases for the indoor air to be clean.

2. The continuous operation is over 8 hours with 1 input of Firewood.

-Firewood does not need to be put in with no hassle, and the heating continues up to 12 hours, for the combustion is automatically repeated when it reaches the set temperature.

3. Heated air temperature can be adjusted (90 °C ~ 150 °C).

-Reduce fuel consumption and overheating prevention are guaranteed, for the automatic combustion and control take place within the setting range of the required heated air temperature.

4. Complete combustion guarantees better fuel ratio and air quality.

-The smoke emitted into the atmosphere is the incomplete combustion gas from unburned fuel; burning the smoke thus serves an efficient use of the fuel and reduction of the pollutants that are discharged into the atmosphere.

5. Easy cleaning with no tar owing to high-efficiency heat exchanger.

Completely combusted fuel reduces the amount of the re-generation (0.5% to 3%). It ensures easy cleaning and reduced risk of fire since ash is collected in the ash pan after combustion.

6. Wood is also energy. Phenomenal fuel savings of 60% was achieved.

Complete combustion prevent the waste of fuel; phenomenal thermal efficiency of the twin structure reduces fuel saving more than 60% compared to conventional products.

7. Relieves you of worries of fuel waste and system failure.

Local combustion only to the extent necessary from the bottom of the combustion chamber prevents the waste of fuel; the supply of the fuel at the top by gravity after the burning of the fuel at the bottom excludes the concern about the failure of the system.