EPS Controller

Model : EPS 48 CB-NT
Dimension(W x L x H) : 195 x 245 x 52mm

Market Areas

• Domestic market : Korea
• European market : TVH in Belgium
• Other market : Japan

Application Areas

• Applicable to all counter balance type forklifts

Operation Principle

• When car key is switched ON, then EPS contactor switched ON
• The voltage of torque sensor will be between 5.5V and 6.5V in the neutral position and 2~5.5V or 6.5V~10V in right or left turning
• When error takes place, EPS controller will be switched off for safety reason

Features and Advantages

Steering Effort Adjustment
. The bigger effort number is, the smaller steering effort is.
. The effort number should be adjusted toword smaller number in case the capacity/weight of forklift is small.
. Speed will be directrly shown and applied by adjusting Digital switch in the neutral position.
Toyota type : "]"(twinkling) + Effort number(0~9) displayed
Other Type : "["(twinkling) + Effort number(0~9) displayed

Error Display
Back up Error Display
In case that error such as E1~E5 happens, error will be displayed by blink. (The error display will be cleared after 10 times key On/Off.)

Model : EPS 24 / 48RB
Dimension(W x L x H) : 173 x 100 x 54mm

Market Areas

• Domestic market : Korea
• European market : TVH in Belgium
• Other market : Japan

Application Areas

• Applicable to all reach type forklifts (Resistance type torque sensor)
• Applicable to some of 3-wheel counter balance type forklifts

Operation Principle

• When car key is switched ON, then EPS contactor switched ON
• The voltage of torque sensor will be between 5.5V and 6.5V in the neutral position and 2~5.5V or 6.5V~10V in right or left turning
• When error takes place, EPS controller will be switched off for safety reason

Features and Advantage

• Compatible to 24V and 48V
• Applicable to reach type forklifts. And sensor type is matched to 5k volume resistance