DN-7100 Product Specifications

NEMCO Fresh Valve

	NC-1/2 This part is for the supplying water to bidet, after installation to the fresh valve, hole is made, good for small quantity, self water-drain valve is built in it, repairing bidet is easy.
	NO-1/2 This part is for supplying water to bidet, installation is done by changing the part of fresh valve good for large quantity installation, self water-drain valve is built in it, repairing (A/S) is easy.

Features of HUSIR bidet

• Bidet, Cleaning : Strong but soft touch turning water jet.
• Removing anxiety of electronic(shot circuit, electro magnetic wave, electricity)
• Semi permanent valve(super minute brass parts) adopted.
• Using direct tap water, no worrying for water pollution.
• Using worm water is possible anytime you want.
• Perfect installation for any type or size of toilet stool.(round type)
• Clean nozzle.(high temperature nozzle cleaning)
• Soft massage effect for enema.

Especially Good for These People

	For someone who suffers from diseases of anus Soft massage effect helps the anus troubles.
	For pregnant women Delicate cleaning pevents anus troubles, and make us feel fresh.
	For old and weak people Easy treatment after evacuating.
	For Children Soft cleaning helps for the fragile skin of kids.

HUSIR Bidet's Cleaning, Sanitary Capacity

	The intensive massage helps ease evacuation, the strong power jet water massages intensively, everyone is released from constipation, definitely a good news for someone who suffers from constipation.
	Nozzle cleaning faculty with high temperature. Nozzle cleaning is possible whenever you want it. (self-cleaning)

Usage Method

Level of water pressure
The cold/hot control valve of adapter(C) should be adjusted and set after testing so the pressure is balanced. Excessive pressure is not beneficial. Alter the pressure to a sufficient level.

Altering the Position
Position the Bidet so the water sprays evenly around the anus.
To prevent slip of position, please insert(attach) the sponge pad between the toilet and Bidet.

In Case of s Larger Toilet
Open the nozzle and move it to the side.
At this time, pull the inside hose taut and attach it firmly to the nozzle.(Use Bond)
Attach the toilet seat to the farthest thome of the Bidet's seat combination opening(In an "L" shape). (Refer to pic1)

Correct Usage

• Step1 : Turn on the Drain control knob to remove all cool water from the hot water pipe while using the toilet for a hot water washing
• Step2 : Turnoff the Drain Control knob and adjust the water temperature at the adequate level.
• Step3 : Wash your posterior area raising water pressure slowly with the water pressure control Knob and give a massage with strong water for 2-3 minutes.
• Step4 : If the water pressure is powerful, the water penetrates deep into the large intestines removing gas and excrement remains, preenting constipation.
• Step5 : Water enters into women's genitals, allowing better washing towards the back.
• Step6 : Rinse front and back by using charming cleansing with warm water for 1~2minutes.
• Step7 : Wipe with a towel or toilet paper.

Caution

1. If the temperature has continuously been set on high, there may be a possibility of getting a burn from the heated water.
2. A low temperature is strongly recommended after a shower.
3. If a problem should occur, close the pressure control on the adapter.
4. Use of warm water over hot water is recommended concerning the user's health

	Cleansing the Anus Regular cleansing is important. Start with wead cleansing, moving onto a more intense of water. Wipe the remaining water with or paper towel.
	Cleansing for Women Designed specially for women. Cleaning forward about 30 degrees aloows water to wash the public area. Experience a stimulating massage by the use flowing water.

Installation Method

Installation Schematic

Installation

• Step1 : Shut off the cold/hot water control valve(A)
• Step2 : Release the cold/hot water pipe(B) and attach the flexible hose
  (If it's flexible at the existing water pipe, undo the bottom part and attach the adaptor.)
• Step3 : Attach the Bidet's connection hose according to the picture and fasten it with nut.
• Step4 : Affix the Bidet to the toilet.
• Step5 : Arrange it to deserved position and secure it.

Caution

1. When tightening all nuts, do not use extensive force.
2. Pay special attention to the nut at the back of the Bidet's head, tightening with minimal amount of force.
3. Melting bit of the ends of the tube with fire will make it easier with connecting process.