GEP 1/3 HP, 1/2 HP, 1HP motor pump:

1/3 HP, 1/2 HP and 1HP motor pumps move the jack fast by automatic double speed control and are driven by one phase motors of 1/3, 1/2 and 1 horsepower respectively. 4 way valve can be fixed at forward, stop or backward location.

GEP 2HP, 3HP, 5HP motor pump :

2 HP, 3 HP and 5 HP Motor pumps move the jack fast by automatic double speed control and are driven by three phase motors of 2, 3 and 5 horsepower respectively.
These pumps are mainly used for double-acting jacks and the control handle of the 4-way valve can be fixed at forward, stop or backward location.
If the handle is fixed at stop location, the pressure of the jack is constantly maintained but the pump is continuously operating. These pumps are designed to be used at maximum pressure of 720 Bars and can be used in any work environment favored by its diverse output capacity.
All models can be remotely controlled when the solenoid valve is mounted.
Safety pressure switch, manual valve, pilot check valve (for cylinder) or cock type valve can be installed, depending on the work environment of the operator."