Transmission Gear

• Product : Transmission Gears for Commercial Truck and Bus
• Equipment : 3500T0N Press, 4500T0N Press
• Range of Dimension : Work is available to Ø320mm of outer diameter of the flange. The machine is designed with consideration of a safety factor as the machine is shaped with a thin and wide RIB part and accordingly it is likely to be overloaded.
• Technical Character : Caution is required when it is designed because of quality problems on a connection part of RIB. It is produced with holes on the RIB in order to reduce weight and labor cost.

Ring Gear

• Product : Ring gear used for device to alter the spinning force of vehicle transmission into the driving force of both wheels
• Shape : Return ratio is low because of wide inner diameter
• Range of Dimension : Work is available to Ø320mm of outer diameter of the flange.
  The machine is designed with consideration of a safety factor as the machine is shaped with a thin and wide RIB part and accordingly it is likely to be overloaded.
• Technical Character : Vertical flow line on should be formed on the incisal edge of tooth then after machining, the distortion of tooth part in not found. Shape of flow line is changed by rough-shaping setting and the size of raw material.

Bevel Gear

• Product : The sort of BEVEL GEARs, which are used for the device to distribute rotation speed of both wheels when it is moving on a curve.
• Equipment : Mainly produced at small press, 1300 ton or 1600 ton press
• Range of Dimension : It's possible to produce at normal press line.
• Technical Character : Materials and processing costs are reduced by inserting tooth shape into the shape of product during hot forging process. There are the effects of improvement of strength as a flow line is also formed on the tooth shape.