I. High Pressure Coolant System

For processing problem, chip blocking in automation process, etc. you can solve them by using high-pressure cutting oil now!

Low-pressure cutting oil (14kgf/cm2) is not able to pass through cutting heat curtain that take place from high-speed rotation processing being evaporated before reaching cutting area, which may not serve its proper function as a cutting oil.

Especially for CNC lathe and automatic lathe requiring high-precision, processing of the materials difficult to cut, complex processing, high-speed processing for muilti-product, it is necessary to use high-pressure cutting oil now!

Improvement in chip-treatment capacity
High pressure cutting oil system enables smooth chip treatment in complex processing of the materials difficult to cut and automation process. Especially high-pressure cutting oil exceeding 70kgf/cm2 is effective in cutting the chips and discharging them.

Improvement in cutting speed
Improved in general steel material and the materials difficult to cut by 20%

Improvement in tool life
Improved in the process from rough grinding to finish grinding by 50%

II.Advantage of MF Series High Pressure Coolant System

Hole Processing / Through Tool Coolant
	Supplying cutting oil to the point for processing at maximum pressure Discharging chips effectively through the hole in the processing of the material difficult to cut Extending tool life and improving cutting condition in the processing of deeper hole with diameter to be grinded
Turning/High Pressure Coolant
	Directly spraying cutting oil at the processing area so as to reduce the occurrence of thermal zone in large scale It enables to generate wedge effect by the pressure of cutting oil, and reduce wear of tool by cooling the contact area between chip and tool Improving the discharge of chip by cutting chips into small pieces so as to prevent recutting by chip, and subsequently improving roughness and enhancing the life of tool

III. Characteristic of MF Series High Presssure Coolant System

Safety and Convenience
	Adopting Sub Tank (Clean Tank) and Level Switch for continuous use in smooth manner Applying low-noise high-pressure pump with high durability Attaching Solenoid Valve for reasonable use of cutting oil Ergonomically designed construction
Continuous Use
	Dual type filter attached enables its conversion into stand by filter through conversion lever manipulation when replacing filter; Filter replacement without the suspension of machinery/system enables continuous use of machinery and automation. Sensor is attached, which automatically marks the time for filter replacement. Function of filter automatic-conversion; Option of Discharge Port Sol. Valve (Max. 8 Ports) can be selected

IV. Application of MF Series High Pressure Coolant System

CNC Lathe/Automatic Lathe

• Improving processing speed in precise and complex processing of the material difficult to cut
• Discharging chips smoothly in the processing of gun drill for small diameter
• Separating and discharging chips easily from material, chuck or automated device in narrow space so as to enable automation process such as Bar Feeder.
• Adopting the specification proper for CNC lathe and automatic lathe for convenient use

Small-type Machining Center, Tapping Center

Filtering & high pressure coolant system at economic price that is suitable for small type machining center, tapping center In the case of using the machinery in cell form in continuous processing or automated line, it enables continuous operation without the stoppage of machinery or line Suitable for the general process for Steel, AI, etc. (Drilling, Milling, Tapping, etc.) In the case there are many fine chips in magnetic property such as casting process, etc. it would be efficient with magnetic filter used for pre-filter. In the process having many fine chips, the effect may be reduced.

Result of Chip Control Test when High-Pressure Cutting Oil is used in CNC Lathe(Titanium-Ti6A14V, HRC30)

V. Technical Data -MF Series