Aromatic Polyurea for Steel Spraying Coating
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- spraying coating
- Category
- Cement
Atek Fine Chemical
South Korea
- Verified Certificate
-
16
| Product name | Aromatic Polyurea for Steel Spraying Coating | Certification | - |
|---|---|---|---|
| Category | Cement | Ingredients | - |
| Keyword | spraying coating | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | Stock | - | |
| Supply type | - | HS code | - |
Product Information
POLYTOP 500
Aromatic polyurea for steel spraying coating.
Description
POLYTOP 500 is two component, zero VOC's
(Volatile Organic Compound), 100% solid. POLYTOP 500 passed NSF 61 standard.
So eco-friendly coating material for water pipe coating. It has highly abrasion resistance and bond strength on steel.
Use
- For water pipe coating.(steel and concrete).
- For rehabilitation pipe coating(steel and concrete).
- For water tank.(steel and concrete).
- For steel structures.
- For improved high abrasion resistance abiility.( Dam spillway)
Features
- Zero VOC's (100% solid).
- Satisfied NSF /ANSI 61.
- Short initial curing time (3 min).
- High tensile strength.
- Cures at -25°F to 300°F.
- Excellent abrasion resistance.
- Excellent resistance to solvent.
- Excellent resistance to oil and acid(chemical).
- Excellent bond strength to properly prepared surfaces.
Technical data(wet properties)
|
Appearance
|
liquid
|
|
Specific gravity(25°C)
|
"A" 1.12±0.1
"B" 1.02±0.1 |
|
Viscosity(cps)
|
"A" 400±100
"B" 800±100 |
|
Thermal stability
|
0°C to 50°C
|
|
Shelf life(10-40°C)
(Unopened containers) |
6months
|
(Processing peroperties)
|
Gel time
|
10sec
|
|
Tack free time
|
180-240sec
|
|
Recoat
|
0-12hr
|
(Dry properties)
|
Tensile strength ASTM D412
|
3400±200psi
|
|
Elongation
|
150±50%
|
|
Hardness(Shore)
|
Above65(D)
|
|
Adhesion strength(Steel-SSPC SP10)
|
Above 2000psi
|
|
Abrasion resistance(1kg, 1000rev)
|
20mg(CS-17)
|
|
Impact resistance(Thickness 1mm)
|
Above 2.0kg.m
|
(Chemical resistance)
|
10%-Sulforic acid
|
Not change
|
|
30%-Sodiumcloride
|
Not change
|
|
30%-Sodiumhudroxide
|
Not change
|
|
50%-Sodiumhydroxide
|
Not change
|
|
Diesel
|
Not change
|
|
Salt water resistance
|
Not change
|
Application
- Mix ratio 1:1 , It must use spraying equipment for polyurea. And keep the pressure minimum 2000psi with heating to 65-70°C.(Pre heater temperature should be approx at 70-75°C and hose temperature
should be at 65-75°C). These include GRACO, SPI company product . And Gun models include GRACO, SPI company product for polyurea spraying. - Component "B" must be mixed each day, while to spray.
- Thinning is not required.
- You check the "SSPC SP10" before start spraying.
Caution
- Store in warm place preventing from freezing.
Contents should not be exposed for a long time - In case of contact with skin and eyes, flush immediately with plenty of water and seek medical advice.
- For further information, see the Material Safety Data Sheet
Packing
- POLYTOP 500 "A" is available in 200L steel drums and "B" is in 200L steel drums.
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- LEE, Hong-Sik
- Address
- 32-21, Wonnamsandan 1-gil, Wonnam-myeon, Eumseong-gun, Chungcheongbuk-do, Korea
- Product Category
- Coating & Paint,Concrete,Industrial Supplies
- Year Established
- 2008
- No. of Total Employees
- 1-50
- Company introduction
-
<p>Dear Sir. Ma'am
ATEKFC is a company that not only has revitalized the domestic market for concrete admixtures for construction as well as for polyurea, but also has exported them oversea through know-how that made by having had a long experience, and experts with professional talent. The effords to develop high quality concrete admixtures have been recoanized, and now our products such as a shotcrete accelerator are being exported to the U.S., Canada, Russia and many others.1. Polyurea (POLYTOP : Brand name)
We are producing various kinds of polyurea (two components) , not only by spray type but also by brush type and water soluable polyurea (one component)2.Set accelerator for shotcrete (AF-2000 / AF-3000/2000ㄶ/2500SG/2000L)
We also produce mainly accelerator for shotcrete for tunnel and mine.
We are doing well not only in Korean market as well as overseas market now.3.Admixture for concrete
We are produce speciall admixtures (Cement hydreation control agent for shotcrete system and other concrete)Please feel free to contact us whenever you have any question.
Many thanks.
HS Lee
- Main Markets
-
Australia
Hong Kong(China)
Russia
Thailand
Viet Nam
- Factory Information
-
20
- Main Product
Related Products
White crack resistance high belite sulpho aluminate cement
Snow Melting Heating Calbe SH-SC-85
DEIPA (Diethanolisopropanolamine 85%) from Korea
Sodium Gluconate 99.8%
TIGER SL
