key words: evaluation board, AVR boards, ATMEL kits, ATmega16L-8PU, ATmega16-16PU, ATmega16A-PU

Introduction:

EasyAVR M16 SK is a system produce by AVRVi for AVR study and product development, Rich in resources, JTAGICE emulator and ISP downloader on board, it's a perfect tool for your AVR mcu study.

ATmega16 ATmega32 development board kit

What's on the board:

Features:

The following key features have been implemented:

• JTAG ISP 2in1 On-board, you need not use other JTAG or ISP tool.
• ATmega16 onboard
  • ATmega16A Features:
  • High-performance, Low-power AVR 8-bit Microcontroller
  • 131 Powerful Instructions
  • 32 x 8 General Purpose Working Register
  • Fully Static Operatio
  • Up to 16 MIPS Throughput at 16 MHz
  • On-chip 2-cycle Multiplie
  • 16K Bytes of In-System Self-rogrammable Flash program memory
  • 512 Bytes EEPROM
  • 1K Byte Internal SRAM
• 8 LEDs and a 7 segment led on-board
• 2 RS-232 and RS485 communication port
• IIC E²PROM AT24C01
• LMV358 Signal conditioning circuit
• PCF8563 real time chip
• 1 Beeper
• LCD12864/1602/12232 connector

English user guid Contents

EasyAVR M16 SK 3in1 instruction	1
1. Product introduction	4
1.1 Introduction	4
1.2 Significant features	4
1.3 On-board resource list	4
1.4 System requirements	5
2. System self-test	5
2.1 Check up list of articles	5
2.2 Quick Start	5
2.3 System self-test process	6
3. Configuration DIP switches and jumpers	8
4. Driver Install	11
5. Software Install	12
5.1 Install ICCAVR	12
5.2 Install AVRstudio	13
6. Use on-board STK500 ISP for program	13
6.1 Connect hardware	13
6.2 Use AVRstudio ISP download	14
6.3 Use ICCAVR ISP download	15
7. Use JTAG for program	17
8. Use JTAG for emulation	18
9. Hardware resource	20
9.1 On-board AVR JTAG ISP 2in1	20
9.2 Power Supply	21
9.3 Atmega16 chip	22
9.4 8 separate LED	22
9.5 8 separate keys	23
9.6 Crystal oscillator and reset	23
9.7 7-segment LED display	24
9.8 USB1.1 communication interface	25
9.9 RS232 serial communication port	25
9.10 RS485 communication interface	26
9.11 18B20 and single bus	26
9.12 AD voltage adjustment potentiometer	27
9.13 PWM output	27
9.14 Real-time clock PCF8563	28
9.15 IIC bus EEPROM AT24c01	28
9.16 One active passive buzzer	28
9.17 LM358 signal conditioning	29
9.18 32Pin MCU external terminal	29
9.19 1602 LCD interface	30
9.20 12864 LCD interface	31
10. Material resources	32
10.1 CD content	32
10.2 Experimental contents	33
10.3 Expand board available	35
11. Service and support	36

The package includes:

• One Easyavr M16 SK board with JTAG and ISP on it
• One CD with user guide and the democode and schematic
• One 9V DC Power adapter
• One USB cable (A to B)
• One user guide