Clean Cover is developed for use in all public toilets where special sanitary conditions and low-maintenance are required: Airports, Hospital, Shopping malls, Hotels, Restaurants, Sports complexes, cultural and educational institutes, government buildings, office buildings, train and bus stations, etc.

1) Power: 6~12V hard wire or battery
2) Dimension: 450mm * 520mm * 150mm
3) Drive : 6~12V D/C geared motor
4) Components
- The seat-ring encased in a Cover200 plastic sleeve film
- Motor module to drive the reels
- The two reels to feed and rewind Cover200 plastic sleeve film.
- The housing separated upper and lower contains the reels and power module
- The seat-ring is attached to lower housing
5) Operating
when activated by the wave of a hand on the housing cover mounted sensor, Seat300 dispenses a sleeve film from the fresh Cover200 roll. At the same time, the used sleeve film is cut as it is drawn onto the rewinding reel in the housing It is easy, touch free!
6) Replacing Cover200
Replacing Cover200 sleeves is very easy. When the roll of clean Cover200 sleeves is used up, simply replace the empty roll with a new Cover200 sleeve. It takes not more than a minute and requires no special equipment of training.
Please refer to our home-page 'seat300.com' for more information on our products.