Bearing application

Ready Inspection and Easy Maintenance through Unique Bearing Construction

The ball and roller bearings can be greased while the motor is running. Waste grease is collected in a grease trap mounted on each end bracket. The used grease is removed with a single stroke of the discharge handle, simplifying inspection and maintenance. In frame sizes 500 or above, roller bearings at each end absorb radial load, and ball bearings at the drive end absorb thrust load. This assures stability and longer life.
Sleeve bearings employ efficient sealing between shaft and bearing to prevent lubricants from leaking either into the motor housing or outside the housing. The sleeve bearings are split into two halves. Removing the upper half exposes the bearing interior. Bracket removal is not required for inspection or maintenance.

Ball or Roller Bearing	Frame 450 or below
	Frame 500 or above
Sleeve Bearing

HIGEN Motor Totally Enclosed Fan Cooled Vertical motors are designed to IEC dimension. As the apparatus is built with the main body that is totally enclosed, and cooled by a cooling fan on the opposite drive end, it allows direct installation of a counter apparatus on flange part by using it as a linkage axis bracket. It ensures a full performance of its advantage as motors for Machine tools, Pumps, Centrifuges etc. Often committed in dusty and humid environments.

Type FEV-0 55kW 4p

RATINGS AND SPECIFICATIONS

1. Standard Out put Ranges : See Table 1
2. Types and Starting Torgue.
   TYPE FEVK - Squirrvel-Cage, Starting 100% or above full-load torgue.
   TYPE FEVF - Squirrvel-Cage, Starting 150% or above full-load torgue.
3. Time Rating : continuous
4. Rated Vottage : 6000V 50Hz, 6600V 60Hz
5. Insutation : Class F
6. Allowable Temperature rise : 100℃ (by resistance method)
7. Bearings : Regreasable ball or roller bearings
8. NO.of Motor Leads : 3
9. Connection to Load : Direct drive.
10. Finish in munsell Notation : 5PB 8 / 2.5(Blue)

<Table1> Standard Output Ranges

<Table2> Characteristics

TERMINAL BOXES AND POWER LEAD SIZE
Shown in the table 3 are standard application of terminal boxes to motor output and applicable lead size to the terminal boxes.

<Table3> Terminal Boxes and Power Lead Sizes

CONSTRUCTION OF TERMINAL BOXES

<Drawing1>

DIMENSIONS in mm

Two types of the bearings are used for a motor.
Single-row cylindrical roller bearing are employed at drive end. Single-row deep-groove bearings are employed at opposite drive end. Motor is equipped with a short shaft extension for a direct-connected drive as standard.

Frame. FEV-	Flange No.	LA	LB	LC	LE	LG	DC	DD	KL	LL	LR	L	LZ
280 MBG	FE 600	600	550 js6	660	6	25	725	640	560	1170	170	1340	24
315 MBG	FE 600	600	550 js6	660	6	25	780	690	590	1270	170	1440	24
355 MBG	-	740	680 h7	800	5	25	860	750	630	1510	170	1680	24

Frame. FEV-	Flange No.	Shaft Extensin										Bearing No.		Approx. Weight kg
		Q	QK	QR	S m6	T	U	W	PC	XE	XL	Drive End	Opp Drive End
280 MBG	FE 600	170	140	1.2	85	14	9	22	50	M 12	20	NU 318	6318 C3	930
315 MBG	FE 600	170	140	1.2	95	14	9	25	63	M 16	27	NU 320	6320 C3	1190
355 MBG	-	170	140	1.2	95	14	9	25	63	M 16	27	NU 320	6320 C3	1800