Air Dryer
BDX Series Deliquescent Air Dryer

Features of the BDX Series

• Consists of integrated after cooler + deliquescent dryer + filter + auto-drain + bypass pipe
  
• Minimum pressure dew point -4°C
  
• Oil removal feature . 5㎛ particle removal filter
  
• Low initial investment & maintenance costs
  
• Does not require separate pipe work . Minimal pressure loss
  
• Uses non-toxic desiccant (eco-friendly desiccant)
  
• Overcomes limitations of installation site
  (outdoor installation at temperatures of -20°C possible)

Maximum exit temperature of 65℃ from the receiver tank of the compressor. Maximum exit temperature of 38℃ from after cooler, a lot of water mist produced. Non-powered deliquescent dryer using Dry-O-Life(DOL), Below 55%RH, Min. PDP -4℃ ISO8573-1 ll, lll class compressed air. 5㎛ particle removal filter installed, removes desiccant dust and particles.

Dimensions
	After cooler Deliquescent dryer Particulate filter Auto drain Bypass pipe
Single Tower
Twin Tower

BDX Specifications (after cooler + deliquescent dryer + filter + auto-drain + bypass pipe)

• Based on average Inlet temperature 24°C and Pressure 7kg/Cm². (inlet temperature of less than 38°C recommended)
  
• Desiccant consumption is based on an operating time of 6,000 hours per year.
  
• Design pressure 9.9kg/Cm², Maximum operating pressure 9.0kg/Cm² (If pressure of 10kg/Cm² or higher is required, customized units are available)
  
• BDX-AC model : air-cooled / BDX-HC model : water-cooled
  
• These specifications may be modified to improve quality.